141-400-57-probestationaccessoriescatalog - 第85页

PN 141-400 www.formfactor.com Positioners and Posit ioner Accesso ries • 69 Revision 57, February, 2023 Probe Station A ccessories RF P o sit ion er s S T AND ARD RPP 210 - M/V -L/R- S Feat ur es • RF a nd m ulti-contact…

100%1 / 169
PN 141-400 www.formfactor.com Positioners and Positioner Accessories • 68
Revision 57, February, 2023 Probe Station Accessories
DPP450-M/V-S; DPP450-M/V-PTH
Features
• Use d for high-resolution probing, high-
performance IV/CV probing and failure
analysis, and high-performance internal
node probing
• Use d with PTT and DCP high
performance DC probes and respective
DPP3xx arms
• Precision ball bearings
• Remote control block for fine movement
Specifications
• Feature resolution: 0.2 μm (0.008 mils)
• Travel range:
– X/Y: 10 mm (0.4 in)
– Z: 8 mm (0.3 in) (z-axis control: cw=down, ccw=up)
– Micrometer screws: 500 µm (19.7 mils) pitch (50 TPI)
• Fine movement: 300 µm (11.8 mils) in eac h axis
• Z coarse ad justment range: 15 mm (0.6 in)
• Footprint (WxD): 75 x 50 mm (3 x 2 in)
• Base: magnetic or vacuum
Compatibility
Ordering Information
Platforms +
PTH Arms
Open Platforms +
DC Arms
Platforms +
Dedicated Arms
CM300xi
PA300MA
Summit 11000/12000
SUMMIT200
Tesla
Power
PM5
PM8
PM300
PA200
PA200 BlueRay
PA300
EPS150
MPS150
PA300MA
Standard
(z-axis: cw=d own, ccw=up)
Legacy
(z-axis: cw=u p, ccw=down)
DPP450-M-S 100312+130364
DPP450-V-S 100312+100508
DPP450-M-PTH –
DPP450-V-PTH –
PN 141-400 www.formfactor.com Positioners and Positioner Accessories • 69
Revision 57, February, 2023 Probe Station Accessories
RF Positioners
STANDARD
RPP210-M/V-L/R-S
Features
• RF and multi-contact/mixed-signal probing
and wafer-level reliability probing
• Use d with Infinity / ACP / |Z| Probe high
performance RF probes
• 3 linear axes with precision ball bearings
• Ena bles use of HF probes or probe wedges
• Magnetic mount on HF platen or alternative
with v acuum mount
Specifications
• Feature resolution: <1 μm (0.04 mils)
• Travel range: 12.5 mm (0.5 in) in X, Y and Z (z-ax is control:
cw=down, ccw=up)
• Fine screws: 0.25 mm (0.01 in) pitch (100 TPI)
• Micrometer set planarity ad just: ±5°
• Mount: vacuum or magnetic
• Footprint (WxD): 90 x 60 mm (3.5 x 2.4 in)
Compatibility
Ordering Information
* Available by special request. Contact your FormFactor
representative.
RPP210-M/V/B-L/R-AI
Features
• RF and multi-contact/mixed-signal
probing and wafer-level reliability
probing
• Used with Infinity / ACP / |Z| Probe
high performance RF probes
• Rigid probe platform yields repea table
measurements at microwave
frequencies
• Economical conversion for probe stations originally configured for
needle probing
• Accurate X and Y placement and precise probe overtravel with
easily adjusted knobs
• Micrometer set planarity adjustment
• Captive stages with leadscrew design
• High precision cross-roller bearings
• Configured for use on left/right hand side o f platen
• Can be ordered with either:
– Switch type magnetic base with residual holding force
– Vacuum base
– Bolt-down base
Specifications
• Feature resolution: <1 μm (0.04 mils)
• Travel range: 12.5 mm (0.5 in) in X, Y and Z (z-axis control:
cw=down, ccw=up)
• Fine screws: 0.25 mm (0.01 in) pitch (100 TPI)
• Micrometer set planarity adjust: ±5°
• Mount: vacuum or magn etic
• Footprint (WxD): 90 x 60 mm (3.5 x 2.4 in)
Configurations
• Use on platen left location as West positioner
• Use on platen front location as South positioner
• Use on platen right location as East pos itio ner
• Use on platen rear location as North positioner
Compatibility
• Summit 11000/12000
Ordering Information
• RPP210-M-L-AI
• RPP210-M-R-AI
Platforms + RF Arms
PM5
PM8
PM300
PM300PS
PA200
PA200 BlueRay
PA300
PA300-MA
EPS150
MPS150
Standard
(z-axis: cw=d own, ccw=up)
Legacy
(z-axis: cw=up, ccw=down)
RPP210-M-L-S RPP210-M-L-S-I*
RPP210-M-R-S RPP210-M-R-S-I*
RPP210-V-L-S RPP210-V-L-S-I*
RPP210-V-R-S RPP210-V-R-S-I*
RPP210-B-L-S –
RPP210-B-R-S –
PN 141-400 www.formfactor.com Positioners and Positioner Accessories • 70
Revision 57, February, 2023 Probe Station Accessories
• RPP210-V-L-AI
• RPP210-V-R-AI
• RPP210-B-L-AI
• RPP210-B-R-AI
RPP210-B-SP-AI
Features
• RF and multi-contact/mixed-
signal probing and wafer-level
reliability probing
• Use d with Infinity / ACP / |Z|
Probe high performance RF
probes
• Rigid probe platform yields repeatable measurements at
microwave frequencies
• Economical conversion for probe stations originally configured for
needle probing
• Use with mmWave positioners for 4-port applications
• Accurate X and Y placement and precise probe over travel with
easily adjusted knobs
• Micrometer set planarity ad justment
• Optimized for FormFactor’s MicroChamber
• Captive stages with leadscrew design
• High precision cross-roller beari ngs
• Bolt-down base
Specifications
• Feature resolution: <1 μm (0.04 mils)
• Travel range: 12.5 mm (0.5 in) in X, Y an d Z (z-axis control:
cw=down, ccw=up)
• Fine screws: 0.25 mm (0.01 in) pitch (100 TPI)
• Micrometer set planarity ad just: ±5°
• Mount: vacuum or magnetic
• Footprint (WxD): 90 x 60 mm (3.5 x 2.4 in)
Configurations
• Use on platen in South position only
Compatibility
• Summit 11000/12000
RPP210-B-NP-AI
Features
• RF and multi-contact/mixed-
signal probing and wafer-level
reliability probing
• Used with Infinity / ACP / |Z|
Probe high performance RF
probes
• Rigid probe platform yiel ds
repeatable measurements at micr owave frequencies
• Economical conversion for probe stations originally configured for
needle probing
• Use with mmWave positioners for 4-port applications
• Accurate X and Y placement and precise probe over tr avel with
easily adjusted knobs
• Micrometer set planarity adjustment
• Optimized for FormFactor’s MicroChamber
• Captive stages with leadscrew design
• High precision cross-roller bearings
• Bolt-down base
Specifications
• Feature resolution: <1 μm (0.04 mils)
• Travel range: 12.5 mm (0.5 in) in X, Y and Z (z-axis control:
cw=down, ccw=up)
• Fine screws: 0.25 mm (0.01 in) pitch (100 TPI)
• Micrometer set planarity adjust: ±5°
• Mount: vacuum or magn etic
• Footprint (WxD): 90 x 60 mm (3.5 x 2.4 in)
Configurations
• Use on platen in North position only
Compatibility
• Summit 11000/12000
RPP210-L/R-EW-CMC-AI — RF Probe Positioner Left/
Right Magnetic East-West
Features
• RF and multi-contact/mixed-signal
probing and wafer-level reliability
probing
• Used with Infinity / ACP / |Z| Probe high
performance RF probes
• 3 linear axes with precision ball
bearings
• Used to adapt HF probes or probe wedges
Specifications