00197463-03_SM_CPP_Customer_EN - 第12页
1 Introduction 1.3 Staff Qualifications and Training 12 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 1.2.7 SIPLACE on the World Wide Web (WWW) Log into our SIPLACE® homepage at www.asm-smt.com . You can choose …
1 Introduction
1.2 Other Instructions
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 11
Edition Amendments
02/2018 Amendments and supplements
●
General
– Restructuring the manual
– Incorporating the new CPP M placement head
●
Introduction
– Update of safety instructions
– Tools required, measuring equipment and materials (new section)
●
Usability package (new section)
●
Component camera and component sensor
– Component camera (torque changed, cables/strain relief for GigE, new
cameras)
– Component sensor (component sensor protective cap)
●
Front plate, star, Z axis and smoothed distributor disc
– Front plate (plastic cover, DP clamping ring, new handle)
– Star and smoothed distributor disc (description updated, pin, new
handle)
– Valve terminal (new section)
– SCS (new section)
– Energy transmission for rotor (new section)
– Energy transmission for stator (new section)
●
DP drives
– DP drive (new DP drive for CPP M)
– DP linear guide (description updated)
– Hose on DP drive (description updated, removing the front plate)
●
Pressure control valve (PRV)
– Pressure control valve (new version, Loctite)
– Cable on PRV (description updated)
– Small parts in PRV (new section)
– Exhaust air hose for CPP (new section)
●
Screwed joint, silencer and holding circuit
– Screwed joint (description updated)
– Silencer:
checking the silencer for contamination (new section)
Replacing the silencer (description updated, one-part silencer)
– Holding circuit (description updated)
●
Intermediate distributor and vacuum sensor
– Intermediate distributor 1 and 2 (new ID1 for CPP M)
– Vacuum sensor (new section)
●
Calibration (description updated)
1 Introduction
1.3 Staff Qualifications and Training
12 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
1.2.7 SIPLACE on the World Wide Web (WWW)
Log into our SIPLACE® homepage at www.asm-smt.com.
You can choose between the German and English versions.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can also access the MySIPLACE user group. Here you can call
up special information about our placement systems, e.g.
●
technical documentation
●
technical information
●
spare parts lists etc.
Registration for theMySIPLACE user group is very simple:
► Click at the head of the web site on
and then on the Register
link.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with user name and password
1.3 Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
●
Have received first aid training.
1.4 Abbreviations
Abbreviation Description
CO Component
CP Collect&Place
CPP Collect&Pick&Place head
CPx Collective term for CPP, CP20, CP12 and/or CP6
PRV Pressure control valve (PRV)
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
P&P Pick&Place
SCS Single Core Solution
SW Software
SW70x Software version 70x
TH TwinHead
ID Intermediate distributor
ID1, ID2 Intermediate distributor 1, intermediate distributor 2
1 Introduction
1.5 Tools required, measuring equipment and materials
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 13
1.5 Tools required, measuring equipment and materials
Before starting work, make sure that all the necessary tools and materials are available.
●
As a basic configuration we recommend the "Head Maintenance Kit for CPx" [03109541‑xx]
(see below).
The HMK contains many of the tools and materials needed for service work. Any additional
materials needed will be listed separately.
Please also observe the technical information "Head Maintenance und Exchange
Kit" [DE:TI2017‑09D05] [EN:TI2017‑09E05].
●
The spare parts required can be found in the chapters concerned.
●
For more information refer to the service section of our homepage at www.siplace.com.
Head Maintenance Kit (HMK)
Fig.3: Overview – Head Maintenance Kit for CPx [03109541‑xx].
NOTICE
Various development stages
Your HMK may not contain all the materials shown, depending on its development stage.