00197463-03_SM_CPP_Customer_EN - 第16页
1 Introduction 1.5 Tools required, measuring equipment and materials 16 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
1 Introduction
1.5 Tools required, measuring equipment and materials
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 15
In addition, you need the following tools which are not included in the HMK:
Tools not contained in the HMK: Item no.
Component sensor protective cap CPP 03080984-xx
Universal placement head mounting rack assy 03056231-xx
Electronic screwdriver, slotted 00378526-xx
Torx offset screwdriver TX8 03080081-xx
Mounting Allen key head cameras 03081927-xx
12 nozzles of type 2057 03070280‑xx
Torque wrench snap off, 0.2– 2.0 Nm 03090000‑xx
Jaw plug tool 1-17 for torque wrench 03090001‑xx
Bit WS 1.5 with spherical head 03078707‑xx
Tool extension straight TX6153 03076647‑xx
Tweezers, blunt 145mm size 3mm 00376493‑xx
Size 10 wrench from hexagonal socket wrench set 850‑8mm 03122880‑xx
Tools for removing/fitting and calibrating the head, if needed (see also the
service manual for your machine)
---
Materials
Materials contained in the HMK: Item no.
C08 Cable ties B=2.5mm, L=102mm Panduit 00308458-xx
C10 Lubcon Thermoplex ALN 1001/00, 50ml (blue) 03078556-xx
C11 ISOFLEX Topas 5051 50ml (green) 03078517-xx
C12 Klueberoil GEM 1 220N 50ml (yellow) 03079640-xx
C13 Klueberalfa DH 3-100, 50ml (black) 03078928-xx
C15 Klueberoil LAMORA D 220 30ml (red) 03118539-xx
C17 Whiteboard cleaner 10pcs. 03070074Sxx
C21 Maintenance labels C&P20 - pack of 10 03067486-xx
C22 Cotton swabs 00388764-xx
C28 SM reel of labels 9x5 black matt (200 dots) 00388802-xx
In addition, you need the following materials which are not included in the HMK:
Materials not contained in the HMK: Item no.
Lint-free cleaning cloth, KM wipe 03082092-xx
Ethanol or isopropyl ---
Compressed air ---
Loctite 243 00334892‑xx
1 Introduction
1.5 Tools required, measuring equipment and materials
16 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
2 Overview of the Modules
2.1 CPP Head
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 17
2 Overview of the Modules
2.1 CPP Head
Fig.4: SIPLACE CPP with camera
SIPLACE CPPM [03153719Sxx]
SIPLACE CPP with camera SST29 [03070108‑xx]
SIPLACE CPP without camera [03053528‑xx]
1. Intermediate distributor 1 (ID1)
2. Intermediate distributor 2 (ID2) and
KE control board ID2
(under the cover)
9.2 "Replacing Intermediate Distributors 1
and 2" [}107]
9.1 "Replacing the KE Control Board ZV2
[03073355-xx]" [}105]
3. Star motor (integrated in head housing)
5.2 "Removing and fitting the star (only for heads
from FS05 upwards)" [}43]
4. Smoothed distributor disc (between star motor
and star)
5.3 "Replacing the smoothed distributor disc
[03055431-xx]" [}47]
5. Star with DP drives
6 "DP drives" [}71]
6. Pressure control valve (PRV)
7 "Pressure control valve (PRV)" [}79]
7. Component camera
4.1 "Replacing the component camera
[03018637‑xx]" [}29]
8. Vacuum sensor
9.3 "Replacing the vacuum sensor
[03036806-xx]" [}113]
9. Component sensor in the pick and place position
(on the underside)
4.2 "Replacing the component sensor
[03037106-xx]" [}32]
4.3 "Replacing the component sensor cable
[03063595-xx]" [}33]
10. Z axis
11. Holding circuit supply, integrated venturi nozzles
and valve assembly (valve terminal)
8 "Screwed joint, silencer and holding cir-
cuit" [}93]
12. Single core solution (SCS) – DP drive control
5.5 "Replacing the Single Core Solution (SCS)
[03054790Sxx] (only for heads
fromFS05)" [}
53]
13. Front plate
5.1 "Replacing the front plate [03061102-
xx]" [}35]
14. Return cylinder