00197463-03_SM_CPP_Customer_EN - 第26页
3 Usability package 3.2 Retrofitting the usability package 26 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 NOTICE Small screws and screws with plastic threads When tightening smaller screws and screws with plas…
3 Usability package
3.1 Parts, equipment and tools
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 25
3 Usability package
Various modifications have been made to the CPP head, to make it easier to fit and remove the
SIPLACE Multistar (CPP). These can be retrofitted as a so-called "usability package".
3.1 Parts, equipment and tools
●
Retrofit kit usability CPP [03119882‑xx]
Contents of the "retrofit kit usability CPP" [03119882‑xx]
Quant-
ity
Designation Item no. Figure
1 RH cylinder holder / CPP 03120201-xx
1 Insertion aid - top right / CPP 03118785-xx
1 Label for insertion aid - top right /
CPP
03122619-xx
4 ISO 4762 - M 2 x 8-A2-70 03042526-xx
1 Handle protector CPP assy. 03119772-xx
1 ISO 7046-2-M3 x 5-A2-70-H 03023237-xx
1 Ground connection (ground slit) of
screwed joint CPP
03120256-xx
1 DIN EN ISO 7380-M2 x 4-A2-70 03045177-xx
1 ISO 4762 - M 2 x 4-A2-70 03042523-xx
2 Label for assembly marking CPP 03118678-xx
1 Cover for front plate / CPP 03077012-xx
9 DIN EN ISO 7380-M2.5 x 6-A2-70 03045187-xx
1 Label slanted for assembly marking
CPP
03157186‑xx
2 DIN EN ISO 7380-M2 x 6-A2-70 03045179-xx
1 ISO 7089 - 2.5 - 200 HV - A2 03100632‑xx
1 DIN EN ISO 7380-M2.5 x 8-A2- 03045188‑xx
3 Usability package
3.2 Retrofitting the usability package
26 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
NOTICE
Small screws and screws with plastic threads
When tightening smaller screws and screws with plastic threads, observe the following pro-
cedure:
► Turn the screw first to the left, until it falls into the thread. Then tighten the screw care-
fully.
3.2 Retrofitting the usability package
Assembly of:
●
Cover for front plate / CPP [03077012‑xx]
Fig.19: Pulling off the protective sheet
► Pull the protective sheet off both sides of the
cover.
Fig.20: Fitting the cover
► Fit the cover on the front plate.
Assembly of:
●
Handle protector CPP assy. [031119772‑xx]
Fig.21: Fitting the handle protector
► Fit the handle protector assy for the CPP onto the
front plate.
CAUTION!
Secure the screw with Loctite 243.
.
3 Usability package
3.2 Retrofitting the usability package
Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 27
Assembly of:
●
Insertion aid top right / CPP [03118785‑xx]
●
Label for insertion aid [03122619‑xx]
●
RH cylinder holder / CPP [03120201‑xx]
Fig.22: Replacing the cylinder holder
► Replace the RH cylinder holder. This is neces-
sary before you can fit the insertion aid.
Fig.23: Fitting the insertion aid
► Fit the "insertion aid top right / CPP".
Fig.24: Fitting the label
► Attach the "insertion aid label".