00197463-03_SM_CPP_Customer_EN - 第5页

5 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018 Contents: 10 Calibration .. 115 10.1 Calibrating the Heads and Cameras (SW70x) .. 115 10.2 Calibration Procedure .. 116 10.3 Calibrating the CO Sensor .. 1…

100%1 / 120
4 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
Contents:
5 Front plate, star, Z axis and smoothed distributor disc.. 35
5.1 Replacing the front plate [03061102-xx].. 35
5.2 Removing and fitting the star (only for heads from FS05 upwards).. 43
5.3 Replacing the smoothed distributor disc [03055431-xx].. 47
5.4 Removing the valve terminal (only for heads from FS05 upwards).. 49
5.5 Replacing the Single Core Solution (SCS)[03054790Sxx] (only for heads
fromFS05)..
53
5.5.1 Power module for 12 DP drives [03054771‑xx].. 58
5.5.2 Control module for 12 DP drives [03054784‑xx].. 60
5.5.3 Troubleshooting.. 61
5.6 Replacing the energy transmission for the rotor [03068843‑xx].. 63
5.7 Replacing the energy transmission for the stator [03068842‑xx] (only for heads
fromFS05)..
66
6 DP drives.. 71
6.1 Replacing the DP drives.. 71
6.2 Replacing the DP linear guide (segment guide) [03039099‑xx].. 74
6.3 Replacing the DP Drive Hose [03015920Sxx].. 75
6.4 Calibrating the segment offset.. 77
7 Pressure control valve (PRV).. 79
7.1 Replacing the PRV [03072785‑xx].. 79
7.2 Calibrating the digital PRV.. 82
7.2.1 Zero Point Calibration of Pressure Control Valve.. 82
7.3 Replacing the cable on the PRV [03063596‑xx].. 83
7.4 Replacing small parts on the PRV.. 84
7.5 Exhaust air hose for CPP [03077294‑xx].. 92
8 Screwed joint, silencer and holding circuit.. 93
8.1 Overview of screwed joint, holding circuit and seals.. 93
8.2 Replacing the screwed joint.. 94
8.3 Silencer.. 96
8.3.1 Overview of silencer versions.. 96
8.3.2 Checking the silencer for contamination.. 96
8.3.3 Replacing the silencer.. 97
8.4 Replacing the holding circuit.. 101
9 Intermediate distributor and vacuum sensor.. 105
9.1 Replacing the KE Control Board ZV2 [03073355-xx].. 105
9.2 Replacing Intermediate Distributors 1 and 2.. 107
9.2.1 Intermediate distributor ZV1/CPP [03065295-xx] .. 110
9.2.2 Intermediate distributor ZV2/CPP [03052586-xx] .. 111
9.2.2.1 Connector Assignment.. 112
9.3 Replacing the vacuum sensor [03036806-xx].. 113
5Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
Contents:
10 Calibration.. 115
10.1 Calibrating the Heads and Cameras (SW70x).. 115
10.2 Calibration Procedure.. 116
10.3 Calibrating the CO Sensor.. 117
6 Service Manual SIPLACE Multistar (CPP / CPP M) 02/2018
Contents: