80S-2080F480F5 - 第132页
2 Introduction and Ba sic Concepts SIPLACE 80S-20/F4/F5 User Manual 2.4 Brief Description and Principles of the User Interface 05/99 I ssue from Software Version SR.405.xx 2 - 48 2.4.4.9 GEM Default Settings (Option) Cli…
SIPLACE 80S-20/F4/F5 User Manual 2 Introduction and Basic Concepts
05/99 Issue from Software Version SR.405.xx 2.4 Brief Description and Principles of the User Interface
2 - 47
PLEASE NOTE
This function can take a relatively long time.
2.4.4.8 Video Image
For certain actions, it may be necessary to overlay the camera image from the MVS system (vision evaluation
unit) on the screen of the station computer during placement.
Click on the
Video image
option in the
Options
menu to switch to the camera image of the MVS system
(vision evaluation unit).
Fig. 2.4.11 Example of a video image
Press the ’ESC’ key to leave the video image and return to the previously displayed menu window on the
user interface.
PLEASE NOTE
The complete range of functions is described in Chapter of this User Manual.
2 Introduction and Basic Concepts SIPLACE 80S-20/F4/F5 User Manual
2.4 Brief Description and Principles of the User Interface 05/99 Issue from Software Version SR.405.xx
2 - 48
2.4.4.9 GEM Default Settings (Option)
Click on the
GEM default settings
option in the
Options
menu to set the default settings for the GEM
option on the station computer.
In this menu, you can set various parameters for the GEM interface. These will be used as standard
parameters for the SIPLACE station when it is switched on.
Fig. 2.4.12 Example of a GEM default setting
PLEASE NOTE
The complete range of functions is described in Section 11.9 of this User Manual.
SIPLACE 80S-20/F4/F5 User Manual 2 Introduction and Basic Concepts
05/99 Issue from Software Version SR.405.xx 2.4 Brief Description and Principles of the User Interface
2 - 49
2.4.4.10 Flux Application (Option)
In order to apply flux for placing flip-chips on a PCB, the process data for the flip-chip must be entered in a list
and general flux application parameters must be entered on the station computer.
Select the
Fluxing
submenu from the
Options
menu on the menu bar
.
Fig. 2.4.13 Flux application option
l Dispense flux, package form list ...
Use this menu to add and edit flip-chip components with an associated package form (GF) no.
l Dispense flux parameters ...
Select the "Dispense flux parameters ..." menu in order to specify data for the flux application sequence.
PLEASE NOTE
The complete range of functions is described in Chapter 11 of this User Manual.