80S-2080F480F5 - 第201页

SIPLACE 80S-20/F4/F5 User M anual 4 Single Functions 05/99 Issue from Software Version SR.405.xx 4.3 Single Functions, Gantry with 6x Revolver Head (f or 80F5) 4 - 25 4.3 Single Function s, Gantry with 6x Revolver Head (…

100%1 / 763
4 Single Functions SIPLACE 80S-20/F4/F5 User Manual
4.2 Single Functions, Gantry with 12x Revolver Head 05/99 Issue from Software Version SR.405.xx
4 - 24
4.2.9 Flux Application Unit/Flux (Option for SIPLACE 80F
4
)
The
Go to refill position, Rinse fluxer head
and
Init. fluxer head
buttons
are only active if the flux applica-
tion unit option has been installed. A description of the functions is given in Chapter 11.7 of this User Manual.
Fig. 4.2.11 Flux application unit/flux for SIPLACE 80F
4
(option)
F
SIPLACE 80S-20/F4/F5 User Manual 4 Single Functions
05/99 Issue from Software Version SR.405.xx 4.3 Single Functions, Gantry with 6x Revolver Head (for 80F5)
4 - 25
4.3 Single Functions, Gantry with 6x Revolver Head
(for 80F
5
)
NOTE
With travel functions of the x or y axis the machine cover must be closed and to execute the function the start
button must be pressed. The gantries will in every case travel only at slow speed.
In main view click on the symbol button for
Gantry functions.
Fig. 4.3.1 Gantry functions
F
4 Single Functions SIPLACE 80S-20/F4/F5 User Manual
4.3 Single Functions, Gantry with 6x Revolver Head (for 80F5) 05/99 Issue from Software Version SR.405.xx
4 - 26
4.3.1 Gantry Functions
In the
Gantry functions
screen click on the symbol button for
Gantry functions.
Fig. 4.3.2 Gantry functions
NOTE
All travel functions of the main axes (x and y) must be launched using the start button. The screen message
’Please press the start button’ which follows the menu item ’Action’ in the main menu will ask you to press the
start button. If the cover is not closed, another screen message will ask you to close the covers.
4.3.1.1 Go to set-up position
In the set-up position, the gantry is in a position in which the feeders can be unloaded and retooled. At this
time, the gantry is located in the center of the machine.
Click on the Go to set-up position button and then press the Start button whenever you are prompted to
do so. The gantry will travel to the set-up position.
F