80S-2080F480F5 - 第226页

4 Single Functions SIPLACE 80S-20/F4/F5 Us er Manual 4.4 Single Functi ons: Transport 1 05/99 Issue from Software Version SR.405.xx 4 - 50 4.4.2 .2 Adj usting the W id th Click on the High speed chec k box. If the ch eck…

100%1 / 763
SIPLACE 80S-20/F4/F5 User Manual 4 Single Functions
05/99 Issue from Software Version SR.405.xx 4.4 Single Functions: Transport 1
4 - 49
4.4.2 Conveyor Width
It will be necessary to alter the width of the conveyor when a different board size is introduced or during vari-
ous types of maintenance work.
In the
PCB transport
screen click on the
Conveyor width
button.
Fig. 4.4.3 Conveyor width
CAUTION
Before adjusting the conveyor width make sure that there are no boards or other objects on the machine’s
conveyors. Failure to do so may result in damage to the machine and board.
4.4.2.1 PCB Transport Width- Measure Width
Within the working area click on the Measure width button . The width of the board conveyor is measured,
displayed and saved.
F
4 Single Functions SIPLACE 80S-20/F4/F5 User Manual
4.4 Single Functions: Transport 1 05/99 Issue from Software Version SR.405.xx
4 - 50
4.4.2.2 Adjusting the Width
Click on the
High speed
check box.
If the check box has been activated, clicking on the
Larger
button will cause the conveyor belts to be
moved apart at high speed.
If the check box has been deactivated, clicking on the
Larger
button will cause the conveyor belts to be
moved apart at low speed.
If the check box has been activated, clicking on the
Smaller
button will cause the conveyor belts to be
moved together at high speed.
If the check box has been deactivated, clicking on the
Smaller
button will cause the conveyor belts to be
moved together at low speed.
NOTE
Once width adjustment has been completed and upon quitting Single functions, the left-hand gantry will carry
out a search run in order to determine the width of the conveyor.
SIPLACE 80S-20/F4/F5 User Manual 4 Single Functions
05/99 Issue from Software Version SR.405.xx 4.5 Single Functions: Transport 2 (Option)
4 - 51
4.5 Single Functions: Transport 2 (Option)
The single function
Transport 2
will not be active unless the option
Twin conveyor
has been physically
installed and activated. See Chapter 11.10 of this user manual too.
Click on the icon for
Single functions - Transport 2
in the main view.
Fig. 4.5.1 Single functions - conveyor 2
All of the functions in this menu are identical to the functions described in 4.4 ’Single Functions: Transport 1’.
F