80S-2080F480F5 - 第410页

6 What should you do .. . ? SIPLACE 80S-20/F4/F5 Us er Manual 05/99 Issue fr om Software Version SR.405.xx 6 - 2

SIPLACE 80S-20/F4/F5 User Manual 6 What should you do ... ?

05/99 Issue from Software Version SR.405.xx

6 - 1

6 What should you do ... ?

6 What should you do ... ? SIPLACE 80S-20/F4/F5 User Manual

05/99 Issue from Software Version SR.405.xx

6 - 2

SIPLACE 80S-20/F4/F5 User Manual 6 What should you do ... ?

05/99 Issue from Software Version SR.405.xx 6.1 When you switch on the SIPLACE line

6 - 3

This chapter covers a number of subjects which are based on experience gained from using automatic place-

ment machines.

We hope to help you to minimize machine down-times by preventing faults before they occur. We also thought

it would be useful to create what we know as operator and line engineer profiles and then use this allocation of

responsibility to achieve the maximum possible efficiency from your automatic placement machines.

6.1 When you switch on the SIPLACE line

6.1.1 Starting the line computer

Switch the monitor on.

Switch on the uninterruptible power supply (UPS). A dialog window will appear after approximately 2 min-

utes.

Enter

plr

in the ’AUTXXXXX login’ box (X = space holder for the identifier).

Press RETURN.

Enter the password and press RETURN again.

The ’Desktop’ menu (starting window) will appear on screen after approximately 3 minutes.

If no password is required, press RETURN twice.

6.1.2 Starting the stations

ATTENTION

Do not switch on the stations and peripherals until the 'Desktop' menu appears on the monitor of the line com-

puter. Otherwise you may experience communication problems.

Before you switch on the automatic placement machines ...

Check that the placement system is connected to the power and compressed air supply.

Do the manometers show the required working pressure?

Carry out a visual inspection of the automatic placement machines. Check, in particular, that there are no

obstructions in the traveling range of the gantries.

Check that the z-axes of all the heads are in the top end position.

Close the protective covers.

Check that there is no diskette in the floppy drive of the station computer.

Switch on the automatic placement machines at the main switch. If the line computer is connected and

communication has been established correctly, the main menu for the ’Operator’ user class will appear

after approximately 2 minutes.