80S-2080F480F5 - 第59页
SIPLACE 80S-20/F4/F5 User M anual 1 Operational Safety 05/99 Issue from Software Version SR.405.xx 1.1 Information on safety 1 - 21 Ever y protec tive co ver on the autom atic p lacement machine has two r ecessed grips (…
1 Operational Safety SIPLACE 80S-20/F4/F5 User Manual
1.1 Information on safety 05/99 Issue from Software Version SR.405.xx
1 - 20
1.1.11 Safety instructions for opening the protective covers
To prevent any risk of injury when the protective covers on automatic placement machines are opened, the
owner must instruct his operators to use the protective covers exactly as specified in the following description.
RISK OF TRAPPING FINGERS IF THE PROTECTIVE
COVERS ARE OPENED OR CLOSED INCORRECTLY
When you open the protective covers, if you place one hand in one of the recessed grips (1) and place the other
hand on the protective cover in order to guide it (item (5) in Fig. 1.1.13), you risk trapping your fingers in the
narrow gap (4) between the monitor traverse (3) and the protective cover (2).
Fig. 1.1.13 Protective covers on the SIPLACE automatic placement machine
- Key to Fig. 1.1.13
1 Recessed grips for opening and closing the protective covers
2 Protective cover
3 Monitor traverse
4 Narrow gap (between 4 and 10 mm)
between the monitor traverse and protective cover
5 Do NOT place your hand on this surface!
SIPLACE 80S-20/F4/F5 User Manual 1 Operational Safety
05/99 Issue from Software Version SR.405.xx 1.1 Information on safety
1 - 21
Every protective cover on the automatic placement machine has two recessed grips (1).
PLEASE NOTE
Always place
both hands
in these recessed grips (see point (1) in Fig. 1.1.14) in order to open or close the
protective covers. This “two-handed operation” will prevent any risk of injuring your hands.
You will also avoid tilting the protective covers during opening or closing, which would place an excessive load
on the guides.
Fig. 1.1.14 Two-handed operation
- Key to Fig. 1.1.14
1 Two-handed operation
1 Operational Safety SIPLACE 80S-20/F4/F5 User Manual
1.1 Information on safety 05/99 Issue from Software Version SR.405.xx
1 - 22