80S-2080F480F5 - 第622页
11 Station Extensions/Options SIPLACE 80S-20/F4/F5 User Manual 11.1 Nozzle Changer for the 12x Revolver Head 05/99 Issue from Software Version SR.405.xx 11 - 6 1 1.1.4 Notes on Op era tion Before refilling a magazi ne fo…
SIPLACE 80S-20/F4/F5 User Manual 11 Station Extensions/Options
05/99 Issue from Software Version SR.405.xx 11.1 Nozzle Changer for the 12x Revolver Head
11 - 5
l Returning a nozzle
- The key plate opens.
- The z axis moves downwards.
- The key plate closes.
- The z axis moves up.
Fig. 11.1.2 Overview of magazines and nozzle garages
- Key to Fig. 11.1.2
1 Position fiducial 2 Key plate
3 Nozzle garage 4 Magazine
5 Nozzle changer 6 Reject position
7 Direction of transport
l Rejecting defective nozzles
- At the reject position the z axis travels a 14 mm stroke.
- The z axis moves upward and the nozzle is pulled off the sleeve by a spring wire.
11 Station Extensions/Options SIPLACE 80S-20/F4/F5 User Manual
11.1 Nozzle Changer for the 12x Revolver Head 05/99 Issue from Software Version SR.405.xx
11 - 6
11.1.4 Notes on Operation
Before refilling a magazine for the first time with a particular nozzle type, affix a sticker marked with the
nozzle type in question on the magazine.
NOTE
Only one nozzle type is permitted per magazine!
Fill the magazines outside the machine and only ever change complete magazines.
Open the key plate and insert the nozzles into the nozzle garages.
Close the key plate so that the nozzles will not be able to drop out of the magazines.
Magazines may only be filled when all nozzles of the revolver head have been returned to the magazines.
If you want to execute various functions of the nozzle-changer, see Sections 4.2.6 and 4.2.7 of this user
manual.
For programming the nozzle-changer at the line computer, see the UNIX line computer user’s manual.
NOTE
Avoid letting components fall onto magazines. This can lead to the
key plate jamming
. Avoid letting compo-
nents fall onto empty locations (locations are magnetic!). Magazines will then not be able to be
set defined
in
the location.
Clear magazines and unused locations
regularly
of components.
SIPLACE 80S-20/F4/F5 User Manual 11 Station Extensions/Options
05/99 Issue from Software Version SR.405.xx 11.1 Nozzle Changer for the 12x Revolver Head
11 - 7
11.1.5 Position Recognition
Each of the magazines holds a position fiducial for position recognition.
Fig. 11.1.3 Relationship between nozzle changer and position recognition
- Key to Fig. 11.1.3
1 Position fiducial 2 Nozzle location in magazine relative to the position fiducial
3 Machine zero point 4 Location of position fiducials relative to the machine zero point
For handling fiducials see Section 5, ’Vision Functions’ in this user manual.