167152 Issue 2 - Maintenance Manual - 第93页
VACUUM FILTRATION UNITS FILTER REPLACEMENT Chapter Issue 2, Jul 16 Maintenance Manual 2.13 VF10 V acuum Filtration Unit MANDA TORY T OXIC CHEMICALS MAY BE PRESENT. SAFETY GLOVES MUST BE WORN. MANDA TORY T OXIC CHEMICALS …
VACUUM FILTRATION UNITS
FILTER REPLACEMENT
2.12 Maintenance Manual Chapter Issue 2, Jul 16
11. Turn the carbon filter unit upside down.
12. To separate the pre-filter unit (11) from the carbon filter unit (12), pull the pre-
filter upwards using the pre-filter frame.
13. Replace the carbon\pre-filter as required and refit the pre-filter into the
carbon filter unit.
14. Refit the air duct to the carbon filter unit.
15. Refit the carbon filter unit to the vacuum filtration unit.
16. Secure the carbon filter unit using the filter retaining clip.
17. Slide the vacuum filtration unit back into the machine approximately halfway
and refit the vacuum tube.
18. Locate the vacuum filtration unit over its four securing holes and secure to
the base of the machine using the four securing screws.
19. Reconnect the two earth leads and the mains connector.
20. Refit the panel removed in Step 2.
VACUUM FILTRATION UNITS
FILTER REPLACEMENT
Chapter Issue 2, Jul 16 Maintenance Manual 2.13
VF10 Vacuum Filtration Unit
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. SAFETY GLOVES MUST BE WORN.
MANDATORY
TOXIC CHEMICALS MAY BE PRESENT. EYE PROTECTION MUST BE WORN.
Location
1
2
3
4
VACUUM FILTRATION UNITS
FILTER REPLACEMENT
2.14 Maintenance Manual Chapter Issue 2, Jul 16
Figure 2-1 View on Front of Machine with Front Cover Removed
Item Description Item Description
1 Machine Frame 3 Filter Case
2 Vacuum Tooling (if fitted) 4 VF10 Vacuum Filtration Unit