SIPLACE Vision Customer_en - 第179页

Feature PIN type Shape & Meas. position 0 degree orientation Filter for feature (terminal) Speciality / comment used at ... Possible to use at ... Reason for reject of the GF- type only with (cubic) rectangle body Ba…

100%1 / 206
GF-type name
SIPLACE VISION
Picture
possible version
/Symetries Body Terminal (PIN) Group optical recognition Convertion/ specialities
additionally f.
ICOS
Special GF's
possible - possible - possible -
all gullwings could be tested
on Pin width s. 702 (SV4.01)
Sockets
Any Pin arrangement
you could imagine Rectangular
Most only a Gullwing prog.
But all Pin and terminal
forms allowed
(Wraparound/J-lead/Ball)
Free Groupping also in
circle / to inside or outside
orientated.
Attention with sideway set,
halfwide PIN-terminals
(FaceDown since
702/SV4.0.1)
Connector
Any Pin arrangement
you could imagine
Rectangular
also Polygon
possible
Most Gullwing;but Wrap-
arond/J-lead Blop allowed
to / not Corner Poly.-circle.
Also notches allow to prog.
any group arrangement
Attention at single sided Pin
arrangement check placement
pos. event. Corr. 1/2 Pin lg.
Manual re-program after
convertion recommended!
Inspection mode is not to switch
off!
Shield
Any corner or polygon
circle arrangement you
could imagine Rectangular Corner and Polygon circle
Require separate group
description because of diff.
SV function re-program.
Evaluation time depend on
prog. angle tolerance (5-10°
recommended) and depend on
the length of the prog.vec
Sep. group / Pin description
always necessary!! Manual re-
program after convertion required!
BGA with
inverse
brightness or
with virtual
Gullwings.
Nonstandard
Any terminal
arrangement you could
imagine
Rectangular
also Polygon
possible
All kind of Pin or terminal
forms allowed - also with
notches to program.
any group arrangement
FaceDown & Rectangle
feature since 702/SV4.0.1
Sep. group /Pin descript at
notches. Manual re-program after
convertion recommend Inspect.
mode is to switch off!
Edition 3.0 17.10.2008 GF kurzref_A4_DE.xls GF prog.ref. landsc Siemens Ind. Sec EA1 SC E
Feature
PIN type
Shape & Meas.
position
0 degree
orientation
Filter for feature
(terminal) Speciality / comment
used at ...
Possible to use at ...
Reason for reject of the GF-
type
only with (cubic) rectangle body
Bare Die
Pos./angle deviation / X/Y-body
dimension
WrapAround
Is the PIN-width tolerance of wide PINs
increased above
40% the pixel pair at the meassured
PIN-end is divided into 2 pairs.
Same happen on extreme wide PINs.
Wraparound could be dark on bright
background
CHIP; MELF; Moulded;
Dpack (wide PIN);
Socket;Connector;
Nonstandard;
Pos. / angle deviation /
Filter to large or small / PITCH /
PIN width / PIN pos. / PIN group
pos.
For MELF X-body length check
Gullwing
Is
the
PIN width
tolerance
of
wide
PINs
increased above 40%
the pixel pair at the meassured
PIN-end is divided into 2 pairs.
Same happen on extreme wide PINs. /since
702 (SV 4.0.1) the gullwings could be inspected
on 'Co-linearity of the PIN Ends in one group.
At small PIN dimensions the 3 (blue)
marks for the bright PINs covering each
other. The position of divided Pixelpairs
are more precise if a Notch is
programmed
ECV; SOT; SOxx; QFP;
Socket; Connector; Dpack
(small PINs and wide PIN);
Nonstandard
Pos. / angle deviation /
Filter to large or small / PITCH /
PIN width / PIN pos. /
PIN group pos.
J-Lead
Use only if the PIN is really a
J-Lead!
If only one Pixel pair is
missing the recognition fail!!
SO-J; PLCC; Socket;
Connector; Nonstandard
Pos. / angle deviation /
Filter to large or small / PITCH /
PIN width / PIN pos. / PIN group
pos.
Corner Out ----
recognition always the same length and with
same distance to the corner. (simplfy
calculation). Do not program the vectors too
long. Otherwise the angle determination is not
The bright shield is at the left side of the
recognition vector! Single feature - NO
row or grid programming
Shield; Nonstandard
corner position
Corner Inside ----
recognition always the same length and with
same distance to the corner. (simplfy
calculation). Do not program the vectors too
long. Otherwise the angle determination is not
The bright shield is at the left side of the
recognition vector! Single feature - NO
row or grid programming
Shield; Nonstandard
corner position
Polygon circle
dark (drillng) ----
Single feature - NO row or grid
programming
Shield; Connector;
Nonstandard
polygon position / polygon
diameter (because of filter dim.)
Polygon circle
hell ----
Single feature - NO row or grid
programming
Shield; Connector;
Nonstandard
polygon position / polygon
diameter (because of filter dim.)
Balls ----
the ring image occure only with a flat
illumination direction to hemisperical
structures.
BGA; Socket; Connector;
Nonstandard X/Y PITCH / Ball-position
Columns ----
the circle image occure only with a steep
illumination direction to flat round
structures.
CCGA; Socket;Connector;
Nonstandard X/Y PITCH / column-position
Blop
Socket; Connector;
Nonstandard Blop position / Blop area
PIN with notch
respective the
PIN type
The notch is NOT actively searched; Filter
avoid only the PIN center. Other
possibilities higher width tol.
only at Nonstandard and
Connector (not to edit)
respective to the kind of Pin
(Gullwing/Wraparound) is the
filter divided. The measurem.
criterias are unchanged.
Centering pin
not centered in
vision system
Centering Pin height could be programmed only
in SiPLACE Pro .
feature to increase the overall component
height since SC/MC603
only at Nonstandard and
Connector
in future (?) to move slowly for
the centerpin height
Depend strongly on fitting illumination.
Calculate a relation between programmed rectangle and real Blop area -
program the X/Y-dimension tolerance large enough.
Feature could be defined in algorithmn (filter type 91) for dark.
Body without any other feature
Edition 3.0 17.10.2008 GF kurzref_A4_DE.xls features Siemens Ind. Sec EA1 SC E
Feature
PIN type
Shape & Meas.
position
0 degree
orientation
Filter for feature
(terminal) Speciality / comment
used at ...
Possible to use at ...
Reason for reject of the GF-
type
Rectangle
feature since
702(sv4.0.1)
The rectangular feature could be a feature of
the comp. Beside the electr. Terminals. But it
could be also the hole component.
the min. respectively thie max. size
depend on the camera type. only for Nonstandard
Edition 3.0 17.10.2008 GF kurzref_A4_DE.xls features Siemens Ind. Sec EA1 SC E