00198764-01_IM_SIPLACE_Pro_17.0_R19-2_EN - 第54页

SIPLACE Pro 17.0 (R19-2) / Installation Manual 11/2019 Edition 54 ► Select the Modify button. ► Click the Next button. The Packages and Features dialo g is displayed. Figure 8-2: Packages and featu res ► Verify the insta…

100%1 / 72
SIPLACE Pro 17.0 (R19-2) / Installation Manual 11/2019 Edition
53
8 Modifying the Installation
The Modify option allows you to change the current installation entries.
NOTICE
You must be logged in as Administrator to change the installation.
8.1 Modifying the SIPLACE Pro Installation
► Log in using an administrative account on the computer.
► Insert the installation media and mount the *.iso file.
► Open Windows Explorer.
► Double-click the BundleInstaller file to modify SIPLACE Pro.
Alternatively, you can start the Modify option as follows:
► Open the Start menu and select Control Panel.
► Select Uninstall a program.
► Click with the right mouse key on the SIPLACE Pro entry in the list of installed programs.
► Select Change from the context menu.
The following dialog is displayed.
Figure 8-1: Modify, repair or remove program
SIPLACE Pro 17.0 (R19-2) / Installation Manual 11/2019 Edition
54
► Select the Modify button.
► Click the Next button.
The Packages and Features dialog is displayed.
Figure 8-2: Packages and features
► Verify the installed features, change the selection as needed and click the Next button.
Unselected features (were installed before) will not be installed.
If you install a local SIPLACE Pro Server, the Configuration of SIPLACE Pro Server dialog is
displayed.
In this dialog is specified under which Windows user account the server component of SIPLACE
Pro runs.
SIPLACE Pro 17.0 (R19-2) / Installation Manual 11/2019 Edition
55
Figure 8-3: Specifying Windows user account
► If applicable, make the desired changes for the account configuration.
► Click the Next button.
NOTICE
Depending on the features you selected at your first installation, the SIPLACE Pro setup
may ask for the name of the SIPLACE Pro Server and / or Line Control Server.
You can find information about these configuration dialogs in section 6.2.1 and section
6.2.2.
In the next dialog, the SIPLACE Pro access rights (SIPLACE Pro Security) are enabled or disabled.