00196613-0102_AI_LP-Dicke6mmDE EN - 第20页
2 Assembly instructions: 6 mm PCB thickness SIPLACE SX1 / SX2 6 mm PCB thickness 06/2009 Edition 20 : Loosen the fixing bolt s (hexagon socket sp anner 6 mm). 2 Fixing bolt
6 mm PCB thickness 2 Assembly instructions: 6 mm PCB thickness SIPLACE SX1 / SX2
06/2009 Edition
19
2.6 Setting the PCB thickness
: Measure the height as shown in the picture at at least four points. For greater accuracy, use
the outer side parts as measuring points.
The measured height must be 176.8 +/- 0.2 mm.
2
2
2
2
2
Top edge of
gantry
(runner for
floating bearing)
Measuring point
for height refer-
ence on the
PCB conveyor 2
2 Assembly instructions: 6 mm PCB thickness SIPLACE SX1 / SX2 6 mm PCB thickness
06/2009 Edition
20
: Loosen the fixing bolts (hexagon socket spanner 6 mm).
2
Fixing bolt
6 mm PCB thickness 2 Assembly instructions: 6 mm PCB thickness SIPLACE SX1 / SX2
06/2009 Edition
21
: Use a 10 mm hexagon socket spanner to reduce the height by approx. 2 mm.
: Measure the height of the conveyor at at least 4 points as shown in the picture on page 20. It
must now measure 178.8 +/-0.2 mm.
: Tighten the fixing bolt once more.
2
: Remove the clamping rail and stopper.
2
2
2
2
2
2
2
2
Clamping rails