00190935-01 - 第35页
Nachrüstanleitung/Retrofitting Instructions Pipettenwechsler Siplace 80S15/F3/S20/F4 Nozzle Changer Ausgabe/Edition 03/97 Seite/Page 35 von/of 44 Figure 7: Connecting the power cable of the revolver head nozzle changer t…
Pipettenwechsler Siplace 80S15/F3/S20/F4 Nozzle Changer Nachrüstanleitung/Retrofitting Instructions
Ausgabe/Edition 03/97
Seite/Page 34 von/of 44
1.5.1.3 Gantry 2 (Siplace 80S15)
• Dismantle the control unit.
• Push connecting cable Y0553-W2 through the hole in the machine frame to the compressed air unit
(see figure 5).
• Using a suitable tool (e.g. a rod), pull the connecting cable Y0553-W2 from the compressed air unit,
through the machine frame to the terminal panel Y0904.
• Push the compressed air hose through the hole in the machine frame to the compressed air unit.
• Tie the cable and compressed air hose together with cable lacing.
1.5.1.4 Electrical connections
• Guide the connecting cable Y0553-W1 or Y0553-W2 through the cable duct into the terminal panel
Y0904.
• Connect terminal Y0553-W1 or Y0553-W2 on the nozzle changer to the terminal panel Y0904 as
shown in the following terminal diagrams (figures 6 and 7).
• Please note that there are differences between the Siplace 80S15 and 80F3.
Figure 6: Connecting the power cable of the revolver head nozzle changer to the Siplace 80S15
Nachrüstanleitung/Retrofitting Instructions Pipettenwechsler Siplace 80S15/F3/S20/F4 Nozzle Changer
Ausgabe/Edition 03/97
Seite/Page 35 von/of 44
Figure 7: Connecting the power cable of the revolver head nozzle changer to the Siplace 80F3
Pipettenwechsler Siplace 80S15/F3/S20/F4 Nozzle Changer Nachrüstanleitung/Retrofitting Instructions
Ausgabe/Edition 03/97
Seite/Page 36 von/of 44
1.5.1.5 Connecting the compressed air supply
Figure 8: Connecting the revolver head nozzle changer to the compressed air unit
• Attach the connector PK-3 to the free compressed air connection on the back of the compressed air
unit (Siplace 80S15/F3 ⇒ 5.6 bar; Siplace 80S20/F4 ⇒ 5.1 bar).
• Attach the compressed air hose from the nozzle changer valve to this connector.
1.5.1.6 Commissioning
• The procedure for commissioning the nozzle changer is described in section 1.6.