3OM-1343-008_w.pdf - 第308页

6-77 AKFEDT -ID Fig. 3F67 "Nozzle Data" T ab Sheet Fig. 3F68 "Nozzle Data" T ab Sheet [Display] Button When selected, this button displays only the nozzle types for which "V isible" is set i…

6-76

AKFEDT-ID

0601-002

3.2 Nozzle Data

When the "Nozzle Data" tab is pressed in the "Nozzle Data" window, the

following tab sheet appears inside the window.

Fig. 3F65 "Nozzle Data" Tab Sheet

Fig. 3F66 "Nozzle Data" Tab Sheet

3.2 Nozzle Data

6-77

AKFEDT-ID

Fig. 3F67 "Nozzle Data" Tab Sheet

Fig. 3F68 "Nozzle Data" Tab Sheet

[Display] Button

When selected, this button displays only the nozzle types for which

"Visible" is set in the "Visible ﬂ ag" text boxes.

When the [Display] button is pressed to cancel the display, a list of

nozzles appears, enabling you to check only the nozzle types for which

"Unvisible" is set in the "Visible ﬂ ag" text boxes.

[High] Button

When selected, this button displays only the nozzles for high-speed

components.

[Odd] Button

When selected, this button displays only the nozzles for middle-size

odd-shaped components.

0604-003

3.2 Nozzle Data

6-78

AKFEDT-ID

[Multi] Button

When selected, this button displays only the multifunctional nozzles.

Note

By pressing each title button in the nozzle data, the listed nozzles can be

re-arranged in the ascending or descending order (nozzle IDs, lengths,

etc.).

Nozzle ID

Shown are the nozzle IDs (names).

Shape Code

Set a nozzle shape in each text box. "Circle" or "Rect" can be selected.

Note

In the case of a rectangular nozzle, the pre-rotational pick-up control

(control based on the parameter set in the "Pickup angle [deg]" text box in

the "Component Library" edit window) may be required depending on the

packaged posture of a component.

Reference

Refer to the instruction manual of the component library for details.

Length [mm]

Set the nozzle length in this text box.

Tip Polarity

Set the polarity of the nozzle tip (shape).

Enable :

Special Nozzle with Polarity (Asymmetrical)

Disable :

Round Nozzle or the like without Polarity

Outline X (Horizontal) and Y (Vertical) [mm]

Set the outer dimensions of the nozzle tip section.

Note

In the case of "Circle", set the same dimensions for "X" and "Y".

In the case of "Rect", set Dimensions X and Y.

Outside Dimension X

Set the dimensions of the nozzle end.

Outside Dimension Y

Fig. 3F69

0604-003

3.2 Nozzle Data