3OM-1343-008_w.pdf - 第59页

1-2 AKFEDT -ID 2. Outline of Pattern Program 2.1 Composition of Pattern Program The pattern program is composed of the following data. Pattern Program (Chapter 3) Pattern Program Name (1.1) Operation Data (1.2) PCB Data …

1-1

AKFEDT-ID

0601-002

1. Outline of Data

In this machine, the following data is used.

Please fully understand the purposes of each data for better performance of

the machine.

Pattern Program (Chapter 3)

The component IDs in the

component library are used in the

pattern program.

Component Library (Chapter 4)

Management Data (Chapter 5)

System Setting (Chapter 6)

Fig. 3A1 Data Composition

•

Pattern Program

Pattern programs must be created for each PCB to be produced.

The automatic operation of this machine is controlled by these pattern

programs.

•

Component Library

This library stores data related to picks, recognition, and placement of each

individual component.

Reference

Refer to the instruction manual

Component Library (GXH Series)

for

the details of the component library.

•

Management Data

This management data contains "Management Data", "Pattern Program

Management Data", "Bypass & Rate Data", etc.

•

System Setting

This function enables the operator to set up various data such as the

machine system data, the nozzle data, and various types of machine

properties, etc., related to the system of the machine.

1-2

AKFEDT-ID

2. Outline of Pattern Program

2.1 Composition of Pattern Program

The pattern program is composed of the following data.

Pattern Program (Chapter 3)

Pattern Program Name (1.1)

Operation Data (1.2) PCB Data (A01)

PEC Recognition Data (A02)

PEC Recognition Mark Data (A03)

Setup Data (A04)

Placement Head/Nozzle Placement Head/Nozzle (B01)

Data (1.3)

Placement Feeder Feeder Base #1 (C01)

Location Data (1.4) Feeder Base #2 (C01)

Feeder Base #3 (C01)

Component ID Feeder Base #4 (C01)

Work Area (C01)

Component Library

Placement Data (1.5)

Placement Data U01 (D01) P-Data (D02)

Placement Data U02 (D01) O-Data (D03)

Placement Data Un (D01)

Note

(1.1) to (1.5), (A01) to (A04), (B01), (C01), and (D01) to (D03) show the

item Nos. to be referred to.

Fig. 3A2 Composition of Pattern Program

2. Outline of Pattern Program

0601-002

1-3

AKFEDT-ID

2.1.1 Outline of Various Data

The pattern program is composed of the following data.

Operation Data :

This data is used to generally manage

the pattern program data.

Placement Head/Nozzle Data :

This data is used to allocate the

nozzles to the speciﬁ ed positions

(Nozzle Allocation No.) on the heads.

Placement Feeder Location Data :

This data is used to set parameters

which determine a component ID

(type) to be allocated to each feeder

slot No. (Fdr No.).

Placement Data :

The set parameters (designation

of coordinates and direction) are

used for placement of components

allocated in the placement feeder

location data.

2.1.2 Input of Each Data

Enter each data in the pattern program edit window.

Reference

Refer to "2. Editing of Pattern Program" in "Chapter 3" for details.

Or, enter each parameter, using the network terminal (option) and send it

to the main machine.

Note

Pattern Program Data Sheets

The pattern program filling in sheet described in "Chapter 7" can be used

for your convenience.

2.1 Composition of Pattern Program

0601-002