3OM-1343-008_w.pdf - 第62页

1-5 AKFEDT -ID Ref. No. Data Name A01_13 PCB locate mode Stage 1 and Stage 2 Operation The 1st sp dclr setting([%] deceleration) [%], The 2nd sp dclr setting([%] deceleration) [%], Z Clamp Delay T imer 1 [msec], Delay T …

100%1 / 343
1-4
AKFEDT-ID
2.2 Composition of Operation Data
This data is used to generally manage the pattern program data.
This data is composed of the PCB data, the PEC recognition data, the PEC
recognition mark data, and the setup data.
Reference
Refer to "1.2 Operation Data" in "Chapter 3" for the details of each item.
A01 PCB Data Table 3A1
Ref. No. Data Name
A01_01 Comment 1 and Comment 2
A01_02 PCB size
X (Horizontal), Y (Vertical), T (Thickness) [mm]
A01_03 PCB origin offset
X (Horizontal), Y (Vertical) [mm], Z (Angle) [deg],
XY-Angle [deg],
X-Direction, Y-Direction, Z Angular Orientation
A01_04 PCB height offset [mm]
A01_05 Placement Reference
A01_06 PCB locate Sequence
A01_07 PCB transfer Sequence
A01_08 Pre-Placed component thickness
Top, Bottom [mm]
A01_09 PCB transfer speed
Input, Between Stages, Output
A01_10 PCB transfer speed des
Avoid comp deviation
(Input, Between Stages, Output)
Speed 1 [mm/sec], Speed 2 [mm/sec],
Acceleration [G]
Stop position control
(Input, Positioning 1, Center, Positioning 2, Output)
Timer [msec], Position [mm]
A01_11 Input Conveyor
Y Position arrange speed setup
(% deceleration) [%]
A01_12 Output Conveyor
Y Position arrange speed setup
(% deceleration) [%]
2.2 Composition of Operation Data
0601-002
1-5
AKFEDT-ID
Ref. No. Data Name
A01_13 PCB locate mode
Stage 1 and Stage 2
Operation
The 1st sp dclr setting([%] deceleration) [%],
The 2nd sp dclr setting([%] deceleration) [%],
Z Clamp
Delay Timer 1 [msec],
Delay Timer 2 [msec],
Operation waiting time [msec]
A01_14 Placement mode
Stage 1 and Stage 2
A01_15 Recovery regulation
U-N (Stage 1/Stage 2)
Block Sort (Stage 1/Stage 2)
2.2 Composition of Operation Data
0601-002
1-6
AKFEDT-ID
A02 PEC Recognition Data Table 3A2
Ref. No. Data Name
A02_01 PEC recognition function
A02_02 Correction algorithm
A02_03 PEC recognition Mode
Global (Zones 1 through 5), Image, local
A02_04 Fiducial mark (Zones 1 through 5)
#1 X (Horizontal), Y (Vertical) [mm],
Mark Code
#2 X (Horizontal), Y (Vertical) [mm],
Mark Code
#3 X (Horizontal), Y (Vertical) [mm],
Mark Code
A02_05 Beam
Stage 1 and Stage 2
A02_06 Sequence
Stage 1 and Stage 2
A03 PEC Recognition Mark Data Table 3A3
Ref. No. Data Name
A03_01 Mark No.
A03_02 Mark Type
A03_03 Mark Size D1 [mm], D2 [mm]
A03_04 Angle [deg]
A03_05 Window Size [mm]
A03_06 Mark Image
A03_07 Mark Level
A03_08 Lighting Level Coax
A03_09 Lighting Level Ring
A04 Setup Data Table 3A4
Ref. No. Data Name
A04_01 Conveyor
A04_02 PCB Y Position Arrangement
Mode, Specify Method, Position [mm]
2.2 Composition of Operation Data
0601-002