Dek-265GSX-User-Manual - 第111页

Parameter Definition Fiducial 1 Y coordinate Distance of the first fiducial from the front edge of the board. Minimum 1mm Maximum Board Width Increment 0.1mm Default 1mm Fiducial 2 X coordinate Distance of second fiducia…

100%1 / 388
Parameter Definition
Board Stop Y This parameter determines the distance from the fixed rail to the board stop
position.
Minimum 25mm
Maximum Board width minus 20mm
Increment 0.1mm
Default Two thirds of the board width
NOTE
Not used while remote board stop is fitted.
Remote Board
Stop X
This parameter determines the displacement of the remote board stop from
the camera reference position.
Minimum Minimum Board Length ö 2
Maximum Board Length
Increment 0.1
Default Board Length ö 2
NOTE
Only used while remote board stop is fitted.
Right Feed Delay This parameter sets a time delay on the board stop to allow for irregular
shaped boards when fed from the right.
Minimum 0sec
Maximum 3secs
Increments 0.1sec steps
NOTE
Not used while remote board stop is fitted.
Alignment Weighting This is only used in 2 fiducial mode. This parameter sets a value determining
how much of the fiducial spacing error is assigned to fiducial 2.
Minimum 0%
Maximum 100%
Increment 1%
Default 50%
See vision system
X Align Weighting This is only used in 3 fiducial mode. This parameter sets a value determining
where the X axis alignment should be optimized.
Minimum 0%
Maximum 100%
Increment 1%
Default 50%
See vision system
Y Align Weighting This is only used in 3 fiducial mode. This parameter sets a value determining
where the Y axis alignment should be optimized.
Minimum 0%
Maximum 100%
Increment 1%
Default 50%
See vision system
Alignment Mode This parameter determines the mode used for board to screen alignment. The
Non Vision option is only available from the configuration file. Options
available are:
2 fiducial; 3 fiducial.
Default 2 fiducial
Fiducial 1 X coordinate Distance of first fiducial from the right or left hand edge of the board
(configuration dependent).
Minimum 1mm
Maximum Board Length
Increment 0.1mm
Default 1mm
1.94 User Manual Software Version 6
MACHINE PROGRAMMING
MENU PARAMETERS
Parameter Definition
Fiducial 1 Y coordinate Distance of the first fiducial from the front edge of the board.
Minimum 1mm
Maximum Board Width
Increment 0.1mm
Default 1mm
Fiducial 2 X coordinate Distance of second fiducial from the right or left hand edge of the board
(configuration dependent).
Minimum 1mm
Maximum Board Length
Increment 0.1mm
Default 1mm
Fiducial 2 Y coordinate Distance of the second fiducial from the front edge of the board.
Minimum 1mm
Maximum Board Width
Increment 0.1mm
Default 1mm
Fiducial 3 X coordinate Distance of third fiducial from the right or left hand edge of the board
(configuration dependent).
Minimum 1mm
Maximum Board Length
Increment 0.1mm
Default 1mm
Fiducial 3 Y coordinate Distance of the third fiducial from the front edge of the board.
Minimum 1mm
Maximum Board Width
Increment 0.1mm
Default 1mm
Select Mark X Distance of the select mark from the right or left hand edge of the board
(configuration dependent).
Minimum 0mm
Maximum Board Length
Increment 0.1mm
Default 148.5mm
NOTE
Only used while Selective Print/Pass is enabled in Set Preferences.
Select Mark Y Distance of the select mark from the front edge of the board (configuration
dependent).
Minimum 0mm
Maximum Board Width
Increment 0.1mm
Default 13mm
NOTE
Only used while Selective Print/Pass is enabled in Set Preferences.
Board 1 Fiducial Type This determines the type of model to be used for this fiducial. Options are
Circle; Rectangle; Diamond; Triangle; Double Square; Cross; Video model.
See vision system
Board 2 Fiducial Type This determines the type of model to be used for this fiducial. Options are
Circle; Rectangle; Diamond; Triangle; Double Square; Cross; Video model.
See vision system
Board 3 Fiducial Type This determines the type of model to be used for this fiducial. Options are
Circle; Rectangle; Diamond; Triangle; Double Square; Cross; Video model.
See vision system
Select Mark Type This determines the type of model to be used on the board for the select mark.
Options are Circle; Rectangle; Diamond; Triangle; Double Square; Cross;
Video model.
See vision system
NOTE
Only used while Selective Print/Pass is enabled in Set Preferences.
Software Version 6 User Manual 1.95
MACHINE PROGRAMMING
MENU PARAMETERS
Parameter Definition
Screen 1 Fiducial Type This determines the type of model to be used for this fiducial. Options are
Circle; Rectangle; Diamond; Triangle; Double Square; Cross; Video model
.See vision system
Screen 2 Fiducial Type This determines the type of model to be used for this fiducial. Options are
Circle; Rectangle; Diamond; Triangle; Double Square; Cross; Video model.
See vision system
Screen 3 Fiducial Type This determines the type of model to be used for this fiducial. Options are
Circle; Rectangle; Diamond; Triangle; Double Square; Cross; Video model.
See vision system
Screen Image The position of the image in the screen frame. Options available are EDGE
justified and CENTRE Justified. Edge justified only is permitted for Sanyo
and Fuji frames.
NOTE
This parameter is not displayed, if Screen Size in Set Preferences has been
selected to Screen Library.
Custom Screen This option allows user definable screen image positions. Selection of this
parameter activates the Print Area Length, Print Area Width and Distance To
Image. Options are:
ENABLED; DISABLED
NOTE
The Custom Screen parameter is displayed on the 265Lt but is only available
on the 265GSX machine.
This parameter is not displayed, if Screen Size in Set Preferences has been
selected to Screen Library.
Distance To Image The meaning of this parameter varies, depending on whether an image is
centre or edge justified. For centre justified images, the dimension is the
distance from the outside rear of the screen frame to the centre of the image.
For edge justified images, the dimension is the distance from the outside rear
of the screen frame to the front edge of the board. This parameter field only
appears if Custom Screen has been selected
Minimum 306mm
Maximum 645mm
Increments 0.1mm
Print Area Length This is the maximum printable distance in the Y direction, ie the maximum
distance the squeegee can travel, front to back. This parameter field only
appears if Custom Screen has been selected.
Minimum 100mm
Maximum 508.5mm
Increments 0.1mm
Print Area Width This is the maximum length of squeegee that could be fitted to the printer,
taking into account screen frame and the amount of mesh surrounding the
mask. This is also the maximum length of paste that can be dispensed. This
parameter field only appears if Custom Screen has been selected
Minimum 100mm
Maximum 510mm
Increments 0.1mm
Screen Adapter The type of screen adapter needed, if any, for the screen to be used for this
product.
Options available are NONE, 255, SANYO, HERAEUS, 20 X 20 and 12
X12.
NOTE
This parameter is not displayed, if Screen Size in Set Preferences has been
selected to Screen Library.
Forward X offset Programmable offset of the print on the board when printing from the rear. A
positive offset moves the print to the right of the board.
Minimum -1.0mm
Maximum +1.0mm
Increment 0.004mm
1.96 User Manual Software Version 6
MACHINE PROGRAMMING
MENU PARAMETERS