Dek-265GSX-User-Manual - 第169页
HOST COMMUNICATIONS COMMS PROTOCOL OPTIONS NOTE Host Comms and therefore Comms Protocol Options are available for the 265GSX only SECS Allows a host computer running SECS II compatible software to talk to the machine via…
HOST COMMUNICATIONS
COMMS PROTOCOL OPTIONS
NOTE
Host Comms and therefore Comms Protocol Options are available for the
265GSX only
SECS Allows a host computer running SECS II compatible software to talk to the
machine via a serial cable connected to the 265 Host Comms port. This
configuration can also be used for GEM if RS232 is preferred to TCP/IP.
If the Host is a PC, DEK’s Off-line Editor software can be used to modify
product files. The Event Log can be read with a text editor.
GEM This configuration implements the SMEMA standard for communications for
Surface Mount Equipment. GEM (Generic Equipment Model) is a standard
sub-set of the SECSII protocol. GEM is specifically designed for implementing
equipment automation in a production enviroment.
In this configuration, a host computer running SECS II/GEM compatible
softwaretalks to the machine via a Network cable. The protocol used is SECS II.
If the Host is a PC, DEK’s Off-line editor software can be used to modify
product files. The Event Log can be read by a text editor. The flexibility of the
GEM interface allows data collection to be customized to meet the users
requirements.
Net_Files This configuration allows users to redirect files away from the Machines local
hard drive to a remote directory on a file server. The 265 is configured to access
a‘product’ directory for a product file and a‘data’directoryforoutputdata files.
At the 265 Machine when a product file is loaded it is read from the ‘product’
directory on the network file server. When it is saved it is saved to the ‘product’
directory on the file server. Files cannot be read from the printer or sent to the
printer across the network.
Once the files are present on the server, they can be accessed from a networked
PC without interfering with the 265 Machine.
At a networked PC, DEK’s Off-line Editor software can be used to modify
product files. QC-Calc software can be used to access SPC data in the
‘READINGS.DEK’ file. The Event Log can be read with a text editor.
For details of Comms Protocol Selection see the next section.
Software Version 6 User Manual 3.1
HOST COMMUNICATIONS
COMMS PROTOCOL OPTIONS
Selecting Comms
Protocol Options
The Comms Protocol Set Preference SECS, GEM, and NET_FILE options each
display additional menu parameters if they are selected in the Set Preferences
window.
On selecting SECS or GEM the following menu bar is displayed:
On selecting NET_FILE the following menu bar is displayed:
If the Enable Comms key is pressed a warning window is displayed, relevant to
the chosen option.
The window warns the user that the appropriate comms interface should be
connected before proceeding and the user is given the option to Confirmor Exit
their selection using the following menu bar:
The NET_FILE option may cause a further window to appear requesting the
Network Password.
3.2 User Manual Software Version 6
HOST COMMUNICATIONS
COMMS PROTOCOL OPTIONS
HOST COMMS
WARNING:
SECS COMMS SHOULD ONLY BE ENABLED IF SECS DRIVER
INTERFACE IS INSTALLED IS IN THIS MACHINE.
PLEASE CONFIRM OR EXIT.