Dek-265GSX-User-Manual - 第21页
14. Select Exit (F8). Exit If this is the correct file for the product proceed to Stage 4. If the file has to be edited proceed to Stage 3. Software Version 6 User Manual 1.5 MACHINE PROGRAMMING STAGE 1
9.
Select Load (F1).
Load
The message ‘Loading Language... ’ is displayed. A delay of approximately
20 seconds takes placeand all displayed text is changed tothe selected language.
The message ‘Language Loaded...’ is displayed.
10.
Select Exit (F8).
Exit
11.
Select Exit (F8).
Exit
12.
Select Monitor (F7).
Monitor
13.
Select Log On (F1).
Log
On
The Operator Log On window is displayed:
Using the keyboard, enter the operator’s name/ID and press Enter on the
keyboard, the operator’s name appears on the status page.
1.4 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 1
Operator Log On
Enter Operator ID:
14.
Select Exit (F8).
Exit
If this is the correct file for the product proceed to Stage 4. If the file has to be
edited proceed to Stage 3.
Software Version 6 User Manual 1.5
MACHINE PROGRAMMING
STAGE 1
STAGE 2A
Loading a Product File - Using Function Keys
1. For an existing product, the product file has already been written. If the
product is new, either edit an existing or a default file.
The product file displayed after the machine has been initialized is the same
one that was resident in the printer when it was powered down.
If this file is correct for the product continue to Stage10 - Running A Product
in Run Mode.
If the product file is incorrect for the current product continue with this
procedure.
2.
Press Setup (F6).
Setup
3.
Press Load Data (F2).
Load
Data
The Load Data File window is displayed:
4.
Use the Left, Right, Up or Down function keys (F4 -F7) to highlight the
required file.
Left Right Up Down
1.6 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 2A
265 Test 1
Load Data File
10x10
265 Test 1
Apple
Calibra
Default
Dek 04
Dek 03
Test 1
Xray
Search
265 Test 1
Product ID