Dek-265GSX-User-Manual - 第219页
RAIL SYSTEM The Rail System diagnostic module contains the following: Home Rail Width Drive Rail to Board Width Drive Rail Width using Two Button Control Drive Belts using Two Button Control Toggle Board Clamp On/Off Tog…
Move Camera Y
Axis Using Jog
Buttons
Selectingthisoptionenables the right jog button to drive the camera in the Yaxis
to the rear at slow speed and using the left jog button drives the camera forward,
stopping immediately the button is released, (see Note above).
Initialize Vision
System
Selecting this option initializes the frame grabber board and it displays a live
image on the vision monitor and a super-imposed box graphic.
Cycle Camera
System
Selecting this option starts a continuous cycle of driving the camera X and Y
carriages to each of the following positions in sequence, dwelling for 2 seconds
at each point, locating the fiducial at each fiducial position, displaying the
returned location and repeating the cycle. The cycle is as follows:
1. Home
2. Fiducial 1
3. Fiducial 2
If the data logging is enabled the fiducial co-ordinates are appended to
C:\PRINTER\CAMERA.DAT file. This continuous cycle is terminated by
selecting the stop key or when the set cycle count has been reached (50).
Cycle count Displays the count when the module is being cycled.
5.24 User Manual Software Version 6
DIAGNOSTICS
CAMERA AXES
RAIL SYSTEM The Rail System diagnostic module contains the following:
Home Rail Width
Drive Rail to Board Width
Drive Rail Width using Two Button Control
Drive Belts using Two Button Control
Toggle Board Clamp On/Off
Toggle Board Stop On/Off
Cycle Board on Belts
Cycle Board Clamp
Cycle Rails
Board Stop in Position On/Off
Board at Stop On/Off
Board at Left On/Off
Board at Right On/Off
Cycle Count
The menu bar changes to the following:
RunDiagnost activates the diagnostic function, as selected by thehighlightbar.
Next/Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Exit returns operation to the module diagnostics page.
Adjust opens the following window:
The menu bar changes to the following:
Incr.
Next/Previous keys move the highlight bar up and down the list of diagnostic
parameters.
Incr./Decr. keys change the value of the selected diagnostic parameter.
Exit returns operation to the rail system diagnostics page.
Software Version 6 User Manual 5.25
DIAGNOSTICS
RAIL SYSTEM
Rail System Test Parameters
BOARD WIDTH
CYCLE COUNT
250.0
50
mm
Cycles
Home Rail Width Selecting this option drives the rail width motor to find its datum position as
determined by its home sensor.
Drive Rail to Board
Width
Selecting this option drives the rail width motor to the width set by the board
width parameter.
Drive Rail Width
Using Two Button
Control
Selecting this option enables the right jog button to drive the rail width motor
forward at slow speed and the Left jog button to drive it back, stopping
immediately the button is released.
Drive Belts Using
Two Button Control
Selecting this option enables the Right Jog button to drive the belt motors to the
right and the Left Jog button to drive them left, stopping immediately the button
is released.
Toggle Board
Clamp
Selecting this option alternately energises the Board Clamp displaying On status
and de-energises it, displaying Off status.
Toggle Board Stop Selecting this option alternately lowers and raises the board stop housed in the
camera assembly, displaying On status when lowered and Off status when
raised.
Cycle Board on
Belts
Selecting this option starts a continuous cycle of driving the belts to the right
until a board reaches the right board sensor, dwelling for 2 seconds and driving
the belts left until a board reaches the left board sensor, dwelling for 2 seconds
andrepeating the cycle until stop is pressed or thesetcyclecountis reached (50).
Cycle Board Clamp Selecting this option starts a continuous cycle of clamping and unclamping the
board clamps. “Cycling Clamps....” is displayed in the prompt box.
Cycle Rails Selecting this option drives the moveable rail from the home position to the
minimum board width and back to the home position. “Cycling Rails....” is
displayed in the prompt box.
Board Stop in
Position
Continuously displays the current status of the board stop lowered position.
Board at Stop Continuously displays the current status of the board at stop sensor.
Board at Left Continuously displays the current status of theleft board sensor. On is displayed
if a board is detected on the rails at the left of the machine.
5.26 User Manual Software Version 6
DIAGNOSTICS
RAIL SYSTEM