Dek-265GSX-User-Manual - 第230页
Toggle Pinch Valve Selecting this option alternately energizes the solvent valve displaying On status, and de-energizes the valve displaying Off status. Toggle Paper Feed Selecting this diagnostic function alternately sw…
SCREEN CLEANER
Selecting this diagnostics module opens the following window:
NOTE
Toggle Paper Feed and Cleaner Paper Low/Advance are not present when the
Vortex under screen cleaner is fitted.
The menu bar changes to the following:
RunDiagnost activates the diagnostic function, as selected by thehighlightbar.
Next/Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Exit returns operation to the module diagnostics page.
Adjust opens the following window:
The menu bar changes to the following:
Incr.
Incr./Decr. keys change the value of the cycle count.
Exit returns operation to the screen cleaner diagnostics page.
Toggle Dry Wipe
Blade
Selecting this diagnostic function lifts and lowers the cleaner body assembly,
displayingOn when the cleaner bodyassembly is liftedto the horizontalposition
and Off when the cleaner body assembly is lowered.
Software Version 6 User Manual 5.35
DIAGNOSTICS
SCREEN CLEANER
Screen C
l
eaner D
i
agnost
i
cs
ON
ON
ON
Cleaner Paper Low/Advance
Cleaner Solvent Low
Pinch Valve Fitted
ON
ON
ON
ON
ON
ON
Toggle Dry Wipe Blade
Toggle Pinch Valve (if fitted)
Toggle Paper Feed
Toggle Vacuum
Toggle Solvent Feed/Tank Press
Toggle Screen Cleaner Home Clamp
Cycle Pinch Valve
Cycle Clean Blade
Cycle Count
Done :-
0, To go :-
50
Cleaner Cycle Parameters
CYCLE COUNT
50.0
Cycles
Toggle Pinch Valve Selecting this option alternately energizes the solvent valve displaying On
status, and de-energizes the valve displaying Off status.
Toggle Paper Feed Selecting this diagnostic function alternately switches the paper feed motor on
and off, displaying its current status. This function is not displayed if the Vortex
under screen cleaner is fitted.
Toggle Vacuum Selecting this option alternately energizes the vacuum pump displaying On
status, and de-energizes the pump displaying Off status.
Toggle Vacuum
Valve
Selecting this option alternately energizes the vacuum valve displaying On
status, and de-energizes the valve displaying Off status.
Toggle Solvent Feed
/Tank Pressure
Selecting this option alternately energizes the pneumatic valve allowing air
pressure to the tank displaying On status, and de-energizes the valve displaying
Off status.
Toggle Screen
Cleaner Home
Clamp
Selecting this option alternately energizes the home clamp electro-magnet
displayingOn status, and de-energizes the electro-magnet displaying Off status.
Cycle Pinch Valve Selecting this option continuously opens and closes the solvent valve for the
number of cycles specified in the Adjust Page.
Cycle Clean Blade Selecting this option continuously raises and lowers the body assembly for the
number of cycles specified in the Adjust Page.
Cleaner Paper Low
/Advance
This diagnostic function continuously displays the status of the cleaner paper
low/advance sensor. This function is not displayed if the Vortex under screen
cleaner is fitted.
Cycle Vacuum
Valve
Selecting this option continuously opens and closes the vacuum valve for the
number of cycles specified in the Adjust Page.
Cleaner Solvent
Low
This option displays the cleaner solvent low sensor status.
Pinch Valve Fitted This option displays the solvent valve fitted status.
Cycle Count This option displays the cycles carried out and cycles to go.
5.36 User Manual Software Version 6
DIAGNOSTICS
SCREEN CLEANER
RISING TABLE The Rising Table diagnostic module contains the following:
The menu bar changes to the following:
RunDiagnost activates the diagnostic function, as selected by thehighlightbar.
Next/Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Exit returns operation to the module diagnostics page.
Adjust opens the following window:
The menu bar changes to the following:
Incr.
Next/Previous keys have no function in this application.
Incr./Decr. keys change the value of the cycle count.
Exit returns operation to the rising table diagnostics page.
Home Rising Table Selecting this option drives the rising table down until it reaches the datum
position as indicated by its home sensor.
Raise Table to
Vision Height
Selecting this option drives the rising table to the height set by the vision height
parameter.
Software Version 6 User Manual 5.37
DIAGNOSTICS
RISING TABLE
R
i
s
i
ng Ta
bl
eD
i
agnost
i
cs
Home Rising Table
Raise Table to Vision Height
Raise Table to Print Height
Restore Default Heights
Set Reference Vision Height
Set Reference Print Height
Drive Table using Jog Buttons
Toggle Table Brake
Toggle Vacuum Tooling Valve
Cycle Rising Table
Rail Lifted Left
Rail Lifted Right
Table at Home
Cycle Count
ON
OFF
OFF
OFF
OFF
Table Cycle Test Parameters
CYCLE COUNT
50.0
Cycles