Dek-265GSX-User-Manual - 第232页

Raise Table to Print Height Selecting this option first checks that both the camera carriage and the screen cleaner unit are home, if either are not at home the message “Home Camera and/or Screen Cleaner first” is displa…

RISING TABLE The Rising Table diagnostic module contains the following:

The menu bar changes to the following:

RunDiagnost activates the diagnostic function, as selected by thehighlightbar.

Next/Previous keys move the highlight bar up and down the list of selectable

diagnostic functions.

Exit returns operation to the module diagnostics page.

Adjust opens the following window:

The menu bar changes to the following:

Incr.

Next/Previous keys have no function in this application.

Incr./Decr. keys change the value of the cycle count.

Exit returns operation to the rising table diagnostics page.

Home Rising Table Selecting this option drives the rising table down until it reaches the datum

position as indicated by its home sensor.

Raise Table to

Vision Height

Selecting this option drives the rising table to the height set by the vision height

parameter.

Software Version 6 User Manual 5.37

DIAGNOSTICS

RISING TABLE

ng Ta

agnost

Home Rising Table

Raise Table to Vision Height

Raise Table to Print Height

Restore Default Heights

Set Reference Vision Height

Set Reference Print Height

Drive Table using Jog Buttons

Toggle Table Brake

Toggle Vacuum Tooling Valve

Cycle Rising Table

Rail Lifted Left

Rail Lifted Right

Table at Home

Cycle Count

OFF

Table Cycle Test Parameters

CYCLE COUNT

50.0

Cycles

Raise Table to Print

Height

Selecting this option first checks that both the camera carriage and the screen

cleaner unit are home, if either are not at home the message “Home Camera

and/or Screen Cleaner first” is displayed. If both are home, the rising table

drives up to the height set by the print height parameter.

Restore Default

Heights

Selecting this option restores the vision height to the default of 50 mm and the

print height to the default of 127 mm.

Set Reference

Vision Height

The function of this option is to set the rising table so that it views the board

fiducials in focus. This is achieved by driving the table up or down while

viewing the vision monitor until the fiducial is in focus. Pressing Calibrate

Vision Height changes the menu Bar showing the option Confirm. Pressing

Confirm sets the current height of the rising table, updating the printer

configuration file.

Set Reference Print

Height

The function of this option is to set the print height so that no gap exists between

the screen and board. This is achieved by driving the table up till the board

clamp just touches the screen.

Selecting this option displays the following window and menu bar:

Table Print Height Calibration

Print Height 128.6mm

Selecting Move locks the lid bolt, moves the table to the height displayed, and

unlocks the lid bolt.

Selecting Exit exits this menu without any changes.

Selecting the Incr. and Decr. buttons allows adjustment of the print height

parameter:

Pressing Set Height changes the menu bar showing the option Confirm.

Pressing Confirm shows the following message, set the current height of the

rising table and update the printer configuration file:

‘This will alter the printer configuration file - please confirm’

Pressing Exit returns to the previous menu without changes to the configuration

file.

Drive Table using

Jog Buttons

Selecting this option enables the right jog button to drive the rising table up at

slow speed and the left jog button drives the table down, stopping immediately

the button is released.

5.38 User Manual Software Version 6

DIAGNOSTICS

RISING TABLE

Toggle Table Brake The brake fitted to the rising table can be toggled between on and off using this

option. On is displayed when the brake is on.

Toggle Vacuum

Tooling Valve

Enables the vacuum tooling valve to be toggled between on and off to facilitate

setup and maintenance.

Cycle Rising Table Selecting this option first checks that both the camera carriage and the screen

cleaner unit are home, if either are not a message is displayed “Home Camera

and/or Screen Cleaner first”. Only if both are home, a continuous cycle starts

driving the rising table to print height, dwelling for 2 seconds, driving the table

down to its datum height, dwelling for 2 seconds and repeating the cycle until

stop is pressed or the set cycle count has been reached (50).

Rail Lifted Left Continuously displays the current status of the rail lifted left sensor. Off is

displayed when the rail has been lifted.

Rail Lifted Right Continuously displays the current status of the rail lifted right sensor. Off is

displayed when the rail has been lifted.

Table at Home Continuously displays the current status of the home interlock sensor, On is

displayed when the rising table is in the home position.

Cycle Count Displays the count when the module is being cycled.

Software Version 6 User Manual 5.39

DIAGNOSTICS

RISING TABLE