Dek-265GSX-User-Manual - 第317页
3. Open the printhead cover. 4. Load the solder paste onto the screen. 5. Close the prinhead cover. Software Version 6 User Manual 9.3 CONSUMABLE REPLENISHMENTS PASTE LOADING
PASTE LOADING Two options are provided for loading paste onto the screen, Manual Load and
Auto Dispense. Manual load allows the operator to load paste by hand onto the
stencil. Auto dispense loads paste automatically onto the stencil in the correct
area, from the paste cartridge located in the paste dispenser on the print carriage.
Auto dispense can be programmed into a product file to take place automatically
during a print run or either option can be selected, directly from the control
console, to take place at the operators discretion.
The print direction option allows the user to select the direction of the next print
stroke after a screen change or removal of a screen for cleaning. The option is
available prior to pressing Run in all machine modes, ie Auto/Single/Stop.
Manual Loading To load paste prior to print run:
1.
Press Paste Load (F3).
Paste
Load
2.
Press Manual Load (F2).
Manual
Load
9.2 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
PASTE LOADING
WARNING
SOLDERPASTEANDSOLVENTS. WHENUSINGORHANDLINGAN
Y
SOLDER PASTE OR SOLVENT FORMULATION THE
MANUFACTURERS' RECOMMENDED SAFETY PRECAUTIONS
MUSTBESTRICTLYADHEREDTO.
WARNING
PROTECTIVE CLOTHING. APPROVED PROTECTIVE CLOTHIN
G
SHOULD BE WORN BY SOLDER PASTEAND SOLVENT HANDLERS
AT ALL TIMES TO ELIMINATE FUME INHALATION, EYE
CONTACT,SKINCONTACTANDINGESTION.
3. Open the printhead cover.
4. Load the solder paste onto the screen.
5. Close the prinhead cover.
Software Version 6 User Manual 9.3
CONSUMABLE REPLENISHMENTS
PASTE LOADING
6.
Press the System button.
7.
Press Continue (F1).
Continue
8.
Press Exit (F8).
Exit
To Load Paste During A Print Run:
1.
Press Paste Load (F3).
Paste
Load
2.
Press Manual Load (F2).
Manual
Load
9.4 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
PASTE LOADING