Dek-265GSX-User-Manual - 第323页

5. Using the Next key (F4) select the paste dispense speed. Next 6. Using the Incr. and Decr. keys (F6 - F7) set the required speed. Incr. Decr. 7. Press Exit (F8). Exit 8. Press Exit (F8). Exit Dispensing Paste at Rando…

100%1 / 388
Paste Dispense Speed:
This determines the speed at which the paste dispenser travels across the screen
and hence the amount of paste which is dispensed. This parameter needs to be
set in conjunction with the Paste Dispense Rate. This can be set to any number
between 10mm/s and 100mm/s in increments of 1mm/s.
To Enter the Paste Dispense Parameters From the Status Page
1.
Press Setup (F6).
Setup
2.
Press Edit Data (F3).
Edit
Data
The following window is displayed:
3.
Using the Next and Previous keys (F4 - F5) select the paste dispense rate.
Next Previous
4.
Using the Incr. and Decr. keys (F6 -F7) set the required rate.
Incr. Decr.
9.8 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
PASTE LOADING
5.
Using the Next key (F4) select the paste dispense speed.
Next
6.
Using the Incr. and Decr. keys (F6 - F7) set the required speed.
Incr. Decr.
7.
Press Exit (F8).
Exit
8.
Press Exit (F8).
Exit
Dispensing Paste at Random Intervals
The operator can cycle the paste dispenser at random intervals and before a print
run in addition to any preprogrammed cycles.
To load paste prior to a print run:
1.
Press Paste Load (F3).
Paste
Load
2.
Press Auto Dispense (F1).
Auto
Dispense
3. If the paste dispenser has sufficient paste the dispenser carries out an
automatic dispense, go to Step 13. If the paste dispenser is low on paste a
warning window is displayed. The warning window varies, depending on
the setting of the consumable action option in set preferences. If the set
preference is set to warn, continue with Step 4. If the set preference is set to
pause or suspend go to Step 8.
Software Version 6 User Manual 9.9
CONSUMABLE REPLENISHMENTS
PASTE LOADING
4. If the set preference is set to warn, the following window is displayed:
The tricoloured beacon shows amber/green.
5.
Select Confirm (F1).
Confirm
6. To replace the paste cartridge carry out the Fitting a New Paste Cartridge
procedure, later in this section.
7. Repeat Steps 1, 2 and 13.
8. If the set preference is set to pause, the following window and menu bar is
displayed:
If the set preference is set to suspend, the following window and menu bar is
displayed:
In both cases the tricoloured beacon shows red.
9.10 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
PASTE LOADING