Dek-265GSX-User-Manual - 第333页

Clean Screen Modes These parameters determine the modes of operation for the screen cleaner. Each mode can have a cleaning sequence with up to six sweeps, each of which can be set to VAC, DRY, WET or NONE. Sweeps set wit…

BLUE UNDERSCREEN CLEANER

Provision is made on the printer for automatic underscreen cleaning. This is

carried out using a lint free paper roll which can be dry or wetted with an

appropriate solvent. A combination of wet and dry wipes can be programmed.

The cleaning options can be programmed into a particular product file so that

they take place at preprogrammedintervals or they canbe selected,directly from

the control console, to take place at the operators discretion.

Programming Screen Clean Operation into a Product File

The screen clean parameters can be setup when editing a product file, while

setting up a new product. It may be more convenient to set these after the

product has been setup and printed and screen cleaning requirements have been

decided upon.

The parameters to be edited that affect the operation of the underscreen cleaner

are:

Clean Screen Rate

This parameter sets the number of print cycles between the cycling of the

underscreen cleaner. This can be set at any number between 0 to 200 in

increments of 1.

9.18 User Manual Software Version 6

CONSUMABLE REPLENISHMENTS

BLUE UNDERSCREEN CLEANER

Clean Screen Modes

These parameters determine the modes of operation for the screen cleaner. Each

mode can have a cleaning sequence with up to six sweeps, each of which can be

set to VAC, DRY, WET or NONE.

Sweeps set with NONE option cause no action to be taken during the sequence.

For example, the settings:

DRY, NONE, NONE, DRY, NONE, WET and

DRY, DRY, WET, NONE, NONE, NONE

Both carry out two consecutive operations, directly followed by one WET

cleaning operation.

The default setting is NONE for all six steps.

Solvent Advice The following solvents MUST NOT be used in the underscreen cleaner.

However, this list is not complete and does not mean that any solvent not

mentioned is compatible, with DEK machines.

• Rosstech 106 FE

• Rosstech 162 ND

• Acetone

DEK are continuously evaluating alternative solvents. If you wish to use a

particular type of solvent, but are unsure of its suitability for DEK machines,

please contact the DEK Customer Support Group.

NOTE

Rosstech 147FD is used within DEK manufacturing division and has been found

to be compatible with DEK underscreen cleaner units. If you are unsure about a

particular solvent please contact DEK Customer Support Group.

Press Setup (F6).

Setup

Press Edit Data (F3).

Edit

Data

Software Version 6 User Manual 9.19

CONSUMABLE REPLENISHMENTS

BLUE UNDERSCREEN CLEANER

The following window is displayed:

Usethe Next and Previouskeys (F4 - F5)tohighlightthescreen clean rate.

Next Previous

Use the Incr. and Decr. keys (F6 -F7) to set the screen clean rate. This can

be set at any number between 0 and 200 in increments of 1.

Incr. Decr.

Use the Previous key (F5) to highlight the screen clean mode. This

parameter determines the mode of operation of the screen cleaner.

Press the Incr. or Decr. keys (F6 - F7) to enter the screen clean mode.

Incr. Decr.

9.20 User Manual Software Version 6

CONSUMABLE REPLENISHMENTS

BLUE UNDERSCREEN CLEANER