Dek-265GSX-User-Manual - 第350页
Solvent Advice The following solvents MUST NOT be used in the underscreen cleaner. However, this list is not complete and does not mean that any solvent not mentioned is compatible, with DEK machines. • Rosstech 106 FE •…
Parameter Definition
Vortex Cassette Life This parameter sets the number of cleaning strokes that are applied before a
cleaning cassette is replaced.
Minimum 0
Maximum 200
Default 20
Increment 1
Vortex Clean Rate This parameter sets the frequency (in print cycles) at which screen cleaning
occurs.
Minimum 0
Maximum 200
Default 0
Increment 1
Vortex Solvent Rate This parameter sets the frequency (in cleaning cycles) at which solvent is
dispensed.
Minimum 1
Maximum 10
Default 1
Increment 1
Vortex Vacuum Start The distance, in from the front edge of the board, where vacuum is applied.
Minimum Vacuum Stop
Maximum Board Width
Default 0mm
Increment 1mm
Vortex Vacuum Stop The distance, in from the front edge of the board, where vacuum application
is stopped.
Minimum -100mm
Maximum Vacuum Stop
Default 0mm
Increment 1mm
Vortex Vacuum Rate This parameter sets the frequency (in cleaning cycles) at which vacuum is
applied.
Minimum 1
Maximum 10
Default 1
Increment 1
Vortex Vacuum Period This parameter sets the period for which vacuum is applied.
Minimum 1 sec
Maximum 10 secs
Default 5 secs
Increment 1 sec
Dry Clean Speed This parameter sets the speed of the screen clean return stroke.
Minimum 10mm/sec
Maximum 120mm/sec
Default 30mm/sec
Increment 1mm/sec
Software Version 6 User Manual 9.35
CONSUMABLE REPLENISHMENTS
VORTEX UNDERSCREEN CLEANER
Solvent Advice The following solvents MUST NOT be used in the underscreen cleaner.
However, this list is not complete and does not mean that any solvent not
mentioned is compatible, with DEK machines.
• Rosstech 106 FE
• Rosstech 162 ND
• Acetone
DEK are continuously evaluating alternative solvents. If you wish to use a
particular type of solvent, but are unsure of its suitability for DEK machines,
please contact the DEK Customer Support Group.
1.
Press Setup (F6).
Setup
2.
Press Edit Data (F3).
Edit
Data
The following window is displayed:
3.
Use the Next and Previous keys (F4 - F5) to highlight the required
parameter.
Next Previous
9.36 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
VORTEX UNDERSCREEN CLEANER
19.0 mm
2.0 mm/s
3.0 mm
0 boards
1
Disabled
Enabled
0 Print Cycle
1 Clean Cycle
Board Width mm
0mm
1 Clean Cycle
5 Second
40 mm/s
UNDER CLEARANCE
SEPARATION SPEED
SEPARATION DISTANCE
BOARD COUNT
PRINT DEPOSITS
PASTE RIDGE REMOVAL
VORTEX CLEAN RATE
VORTEX SOLVENT RATE
VORTEX VACUUM START
VORTEX VACUUM STOP
VORTEX VACUUM RATE
VORTEX VACUUM PERIOD
DRY CLEAN SPEED
PASTE WHILE CLEAN
Edit Current Process Parameters
..more
4.
UsetheIncr.and Decr. keys (F6 -F7) to set the required valueof the selected
parameter.
Incr. Decr.
5. Repeat Steps 3 and 4 for all remaining parameters.
6.
Press Save (F2) on completion of parameter setup.
Save
7.
Press Exit (F8).
Exit
8.
Press Exit (F8).
Exit
Cleaning Cassette
and Solvent
Replenishment
The cleaning cassette and solvent replenishment can take place with the cleaner
unit in the printer. When the cleaning cassette or solvent needs replenishment a
warning window is automatically displayed on the monitor. The warning
window varies, depending on the setting of the consumable action option in set
preferences. The message in the warning window depends on whether the
cleaning cassette or solvent or both require replenishment. The procedure
varies, depending on whether the replenishment is prior to a print run or during a
print run.
Replenishment Prior to a Print Run:
If the set preference is set to warn, continue with Step 1. If the set preference is
set to pause or suspend go to Step 4.
1. If the set preference is set to warn, the following window is displayed:
Software Version 6 User Manual 9.37
CONSUMABLE REPLENISHMENTS
VORTEX UNDERSCREEN CLEANER