Dek-265GSX-User-Manual - 第363页

10. Press Calibrat Heights (F2). Calibrat Heights The message ‘Ensure correct squeegees are fitted’ is displayed. 11. Press Continue (F1) . Continue The message ‘ Calibrating pressure heights - Do NOT open covers!’ is di…

100%1 / 388
6. Fit the front squeegee onto the front squeegee mount again ensuring that the
thrumbscrews are only finger tight.
7. Close printhead cover.
8.
Press the System button.
9.
Press Continue (F1).
Continue
9.48 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
SQUEEGEES
10.
Press Calibrat Heights (F2).
Calibrat
Heights
The message ‘Ensure correct squeegees are fitted’ is displayed.
11.
Press Continue (F1).
Continue
The message ‘Calibrating pressure heights - Do NOT open covers!’ is
displayed.
12.
Press Exit (F8).
Exit
13.
Press Exit (F8).
Exit
Software Version 6 User Manual 9.49
CONSUMABLE REPLENISHMENTS
SQUEEGEES
PROFLOW
ProFlow Cassette
Change
It is necessary at intervals to fit a new ProFlow cassette into the ProFlow transfer
head. If the cassette is empty at the end of a print stroke, the warning window
‘Print Medium Low. Please Replenish.’ is displayed.
NOTE
When using a ProFlow transfer head for the first time or if the transfer head
conditioning chamber has been cleaned, ie free from solder paste. The
conditioning chamber must be primed first with the print medium. Two ProFlow
cassettes are required, the first ProFlow cassette is used to prime the
conditioning chamber. The second ProFlow cassette is fitted ready for machine
operation.
The ProFlow cassette can be fitted or changed prior to and during a print run.
Prior to a Print Run The ProFlow cassette can be fitted or changed prior to selecting Run.
1. If ProFlow is in the home position continue from Step 2. If ProFlow is in the
contact position go to Step 19.
2.
Select Setup (F6).
Setup
3.
Select Setup ProFlow (F4).
Setup
ProFlow
9.50 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
PROFLOW
WARNING
SOLDERPASTEANDSOLVENTS. WHENUSINGORHANDLINGAN
Y
SOLDER PASTE OR SOLVENT FORMULATION THE
MANUFACTURERS' RECOMMENDED SAFETY PRECAUTIONS
MUSTBESTRICTLYADHEREDTO.
WARNING
PROTECTIVE CLOTHING. APPROVED PROTECTIVE CLOTHIN
G
SHOULD BE WORN BY SOLDER PASTEAND SOLVENT HANDLERS
AT ALL TIMES TO ELIMINATE FUME INHALATION, EYE
CONTACT,SKINCONTACTANDINGESTION.