Dek-265GSX-User-Manual - 第42页

15. Press the System button. 16. Select Home Camera (F4). Home Camera 17. Select Print Height (F7). Print Height 18. Select Raise Head (F2). Raise Head 19. Raise the printhead using two button control. Fit the head prop.…

Remove the board and select Board Clamps (F3), to close the clamps.

Board

Clamps

10. Complete the positioning of the support pins.

11.

Select Board Clamps (F3), to open the clamps.

Board

Clamps

12. Slide the board back along the rails to abut the board stop.

13.

Select Head (F2).

Head

14. Remove the head prop. Lower the printhead using two button control.

Software Version 6 User Manual 1.25

MACHINE PROGRAMMING

STAGE 6A

15.

Press the System button.

16.

Select Home Camera (F4).

Home

Camera

17.

Select Print Height (F7).

Height

18.

Select Raise Head (F2).

Raise

Head

19. Raise the printhead using two button control. Fit the head prop.

1.26 User Manual Software Version 6

MACHINE PROGRAMMING

STAGE 6A

20. Check that the setup of the tooling is adequate for the board, adjust as

necessary.

21.

Select Head (F2).

Head

22. Remove the head prop. Lower the printhead using two button control.

23.

Press the System button.

24.

Select Home Position (F7).

Home

Position

Software Version 6 User Manual 1.27

MACHINE PROGRAMMING

STAGE 6A