Dek-265GSX-User-Manual - 第50页

22. Raise the printhead using two button control. Fit the head prop. 23. Check that the setup of the tooling is adequate for the board, adjust as necessary. 24. Select Head (F2). Head 25. Remove the head prop. Lower the …

100%1 / 388
16.
Select Head (F2).
Head
17. Remove the head prop. Lower the printhead using two button control.
18.
Press the System button.
19.
Select Home Camera (F4).
Home
Camera
20.
Select Print Height (F7).
Print
Height
21.
Select Raise Head (F2).
Raise
Head
Software Version 6 User Manual 1.33
MACHINE PROGRAMMING
STAGE 6B
22. Raise the printhead using two button control. Fit the head prop.
23. Check that the setup of the tooling is adequate for the board, adjust as
necessary.
24.
Select Head (F2).
Head
25. Remove the head prop. Lower the printhead using two button control.
26.
Press the System button.
27.
Select Home Position (F7).
Home
Position
1.34 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6B
28.
Select Raise Head (F2).
Raise
Head
29. Raise the printhead using two button control. Fit the head prop.
30.
Select Board Clamps (F3), to open the clamps.
Board
Clamps
31. Remove the board from the rails.
32.
Select Head (F2).
Head
33. Remove the head prop. Lower the printhead using two button control.
Software Version 6 User Manual 1.35
MACHINE PROGRAMMING
STAGE 6B