Dek-265GSX-User-Manual - 第51页

28. Select Raise Head (F2). Raise Head 29. Raise the printhead using two button control. Fit the head prop. 30. Select Board Clamps (F3), to open the clamps. Board Clamps 31. Remove the board from the rails. 32. Select H…

22. Raise the printhead using two button control. Fit the head prop.

23. Check that the setup of the tooling is adequate for the board, adjust as

necessary.

24.

Select Head (F2).

Head

25. Remove the head prop. Lower the printhead using two button control.

26.

Press the System button.

27.

Select Home Position (F7).

Home

Position

1.34 User Manual Software Version 6

MACHINE PROGRAMMING

STAGE 6B

28.

Select Raise Head (F2).

Raise

Head

29. Raise the printhead using two button control. Fit the head prop.

30.

Select Board Clamps (F3), to open the clamps.

Board

Clamps

31. Remove the board from the rails.

32.

Select Head (F2).

Head

33. Remove the head prop. Lower the printhead using two button control.

Software Version 6 User Manual 1.35

MACHINE PROGRAMMING

STAGE 6B

34.

Press the System button.

35.

Select Exit (F8).

Exit

36. Go to Stage 7.

1.36 User Manual Software Version 6

MACHINE PROGRAMMING

STAGE 6B