Dek-265GSX-User-Manual - 第58页

26. Remove the head prop. Lower the printhead using two button control. 27. Press the System button. 28. Select Home Position (F7). Home Position 29. Select Raise Head (F2). Raise Head 30. Raise the printhead using two b…

100%1 / 388
19.
Press the System button.
20.
Select Home Camera (F4).
Home
Camera
21.
Select Print Height (F7).
Print
Height
22.
Select Raise Head (F2).
Raise
Head
23. Raise the printhead using two button control. Fit the head prop.
24. Check that the setup of the tooling is adequate for the board, adjust as
necessary.
25.
Select Head (F2).
Head
Software Version 6 User Manual 1.41
MACHINE PROGRAMMING
STAGE 6C
26. Remove the head prop. Lower the printhead using two button control.
27.
Press the System button.
28.
Select Home Position (F7).
Home
Position
29.
Select Raise Head (F2).
Raise
Head
30. Raise the printhead using two button control. Fit the head prop.
1.42 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6C
31.
Select Board Clamps (F3), to open the clamps.
Board
Clamps
32. Remove the board from the rails.
33.
Select Head (F2).
Head
34. Remove the head prop. Lower the printhead using two button control.
35.
Press the System button.
36.
Select Exit (F8).
Exit
37. Go to Stage 7.
Software Version 6 User Manual 1.43
MACHINE PROGRAMMING
STAGE 6C