Dek-265GSX-User-Manual - 第65页

27. Raise the printhead using two button control. Fit the head prop. 28. Check that the setup of the tooling is adequate for the board, adjust as necessary. 29. Select Head (F2). Head 30. Remove the head prop. Lower the …

21.

Select Head (F2).

Head

22. Remove the head prop. Lower the printhead using two button control.

23.

Press the System button.

24.

Select Home Camera (F4).

Home

Camera

25.

Select Print Height (F7).

Height

26.

Select Raise Head (F2).

Raise

Head

1.48 User Manual Software Version 6

MACHINE PROGRAMMING

STAGE 6D

27. Raise the printhead using two button control. Fit the head prop.

28. Check that the setup of the tooling is adequate for the board, adjust as

necessary.

29.

Select Head (F2).

Head

30. Remove the head prop. Lower the printhead using two button control.

31.

Press the System button.

32.

Select Home Position (F7).

Home

Position

Software Version 6 User Manual 1.49

MACHINE PROGRAMMING

STAGE 6D

33.

Select Raise Head (F2).

Raise

Head

34. Raise the printhead using two button control. Fit the head prop.

35.

Select Board Clamps (F3), to open the clamps.

Board

Clamps

36. Remove the board from the rails.

37.

Select Head (F2).

Head

38. Remove the head prop. Lower the printhead using two button control.

1.50 User Manual Software Version 6

MACHINE PROGRAMMING

STAGE 6D