YG12F_Ope_E - 第8页
vi Safety instructions 2. Safety message This section describes information you should always comply with to prevent unforeseen accidents that might lead to injur y of the operator and others or damage the machine. Hazar…
v
Safety instructions
n
Muzzle plate
Use these plates as a safety measure for the board conveyor entrance and exit openings. Each plate is movable, so adjust
the mounting position to match the boards to be produced.
Muzzle plate
Upper muzzle plate
Lower muzzle plate
Board conveyance plane
91205-L0-00
Upper clearance Lower clearance Remarks
YS100/YS88 8.0 to 38.5mm 1.0 to 31.0mm From board conveyor plane
YS12, YS12P, YS12F, YS24
(YG12, YG12F)
5.0 to 20.0mm 4.2 to 39.2mm From board conveyor plane
YSP 0 to 6.6mm 0 to 26.4mm From board conveyor plane
vi
Safety instructions
2. Safety message
This section describes information you should always comply with to prevent unforeseen accidents that might
lead to injury of the operator and others or damage the machine. Hazards and injuries that might result from
ignoring safety instructions and operating the machine incorrectly are categorized as follows.
2.1 Safety message and categories in this manual
This manual uses the following safety alert symbols, signal words, and format styles according to the degree of
hazard.
n
Safety alert symbols and signal words
w
WARNING
c
n
NOTE
Gives helpful information or key points when operating the machine, in a simple and clear manner.
e
vii
Safety instructions
2.2 Typical warning text found in manual
The following are typical warning message text found in the YAMAHA surface mounter or related product
manual.
2.2.1 Safety instruction
When you see the following cautions or warnings, always read them thoroughly and make sure you fully
understand them.
c
The person operating the machine must have been trained in correct machine operation and safety.
w
WARNING
w
WARNING
w
WARNING