00197402-01 AI X-Feeder Upgrade Package - 第35页
X-Feeder Upgrade Install Fully installed upgrade package AI X-Feeder Upgrade Package AI X-Feeder Upgrade Packa ge 35 3.11 3 . 1 1 F u lly in s t a lle d u p g r a d e p a c k a g e Fully installed upgrade package 1. Revi…
X-Feeder Upgrade Install
Installing the rocker on the foil container
34 AI X-Feeder Upgrade Package AI X-Feeder Upgrade Package
3.9
3.9 Installing the rocker on the foil container
Installing the rocker on the foil container
3.10
3.10 Fitting the Left Side Cover
Fitting the Left Side Cover
Tools required:
▪ Flat bladed (slotted) screwdriver
► (1) Insert the spring into the provided opening .
► Position the rocker with the recess onto the spring.
► (2) Position the rocker so that you can see the open
hole for the bearing shaft through the rocker.
► Press the rocker into the spring, to relieve the bearing
shaft thread during fitting.
► Set the bearing shaft into the hole provided and turn
to tighten.
Tools required:
▪ Phillips screwdriver
▪ TORX screwdriver size T8
► Carefully place the feeder module with the right-side
side down on a stable, level and clean surface.
► (1) Lift the side cover onto the feeder module at a
slant and from the right-hand side.
(2) Make sure that the lugs insert into the drive unit.
► (3) Make sure that the side cover is aligned with the
operating panel.
► Screw the side cover onto the feeder module, as
shown in the following diagrams. Start with screw (A)
on the right, under the operating panel.
Green arrows point to the screws for which you need a
TORX screwdriver with a torque of 0.6 Nm.
Blue arrows point to the screws for which you need a Phil
-
lips screwdriver with a torque of 0.9 Nm.
X-Feeder Upgrade Install
Fully installed upgrade package
AI X-Feeder Upgrade Package AI X-Feeder Upgrade Package 35
3.11
3.11 Fully installed upgrade package
Fully installed upgrade package
1. Revised with new rocker design stuffing gear
2. New folding roller
3. Use cover strip rocker
X-Feeder Upgrade Install
Fully installed upgrade package
36 AI X-Feeder Upgrade Package AI X-Feeder Upgrade Package