CP-6-series Mechanical Reference - 第156页

Part 4 Chapter 3 Air Supply Edition 1.1 4-3-2 CP-6-series Mechanical Reference Notes:

Part 4 Chapter 3 Air Supply

Edition 1.1 4-3-1 CP-6-series Mechanical Reference

3. Air Supply

Point

Connect an external air supply hose to the machine and adjust the filter regulator to set

air pressure to the specified value.

Procedure

1. Attach a socket to the end of the air supply hose and connect the socket to the air

connector plug on the rear right-hand side of the machine.

2. Pull up the knob on the filter regulator to unlock it.

3. Turn the air inlet handle until the filter regulator reads 0.5 MPa (5 kgf/cm

4. Pull down the knob to lock it.

Note: Fuji does not supply the hose.

Plug (20 PM)

Hose (inner diameter: 8 mm)

Socket (20 SH)

Coupler

Standard

IEC compatible

CP6M4019

0.5 MPa (5 kgf/cm

)

Air inlet

(CP-652C only)

CP6M4018

Part 4 Chapter 3 Air Supply

Edition 1.1 4-3-2 CP-6-series Mechanical Reference

Notes:

Part 4 Chapter 4 Checking the Transformer Connections

Edition 1.0 4-4-1 CP-6-series Mechanical Reference

4. Checking the Transformer Connections

Point

Set the transformer inside of the CP-6 corresponding to the supply voltage. If the

transformer is set an incorrect input voltage, electrical parts may be damaged.

Procedure

<CP-6, CP-6M, CP-642, CP-642M, CP-643E, CP-643ME, CP-65>

Remove the screws on the cover and take the cover off. Check that the main transformer

is set to the specified input voltage.

<CP-652C>

Open the box cover, and check that the main transformer is set to the specified input

voltage.

R 1

S 1

U200V

U210V

U220V

U230V

U380V

U400V

U415V

U460V

U480V

V200V

V210V

V220V

V230V

V380V

V400V

V415V

V460V

V480V

W200V

W210V

W220V

W230V

W380V

W400V

W415V

W460V

W480V

T 1

R1 Red

S1 White

T1 Black

CP-652C

CP6M4020

CP-6, CP-6M, CP-642, CP-642M, CP-643E, CP-643ME, CP-65