CP-6-series Mechanical Reference - 第196页

3.2 Station 2 3.2.1 Large Parts Check Sensor The machine has a sensor at station 2 that checks for large parts (1 mm or larger). The machine stops immediately if no part is detected. Sensor Position Adjustment 1. Press t…

3.1.8 Bottom Feeder Lift Sensor Adjustment

WARNING

Turn off the 200 V servo power before carrying out this work.

1. Set the space between the feeder and the lever to be 0.2 mm.

2. Adjust the sensor height so the sensor goes on if a thickness of 0.7 mm feeler gauge

is inserted between the lower surface of the feeder and the lever (suppressing the

lever 0.5 mm).

Lever

Flag

Sensor

Feeder

Level

(by sight)

Fixed bolts

Lever

Sensor

Adjustment bolt

Lever height adjustment Sensor height adjustment

Adjustment bolts

0.2 mm 0.7 mm

Feeder

CP6M5038

Lever

Sensor

Part 5 Chapter 3 Station Adjustments

Edition 1.0 5-3-20 CP-6-series Mechanical Reference

3.2 Station 2

3.2.1 Large Parts Check Sensor

The machine has a sensor at station 2 that checks for large parts (1 mm or larger). The

machine stops immediately if no part is detected.

Sensor Position Adjustment

1. Press the EMERGENCY STOP button. This cuts the 200V servo power and leaves

on only the 100V power supply.

WARNING

• Turn off the 200 V servo power before carrying out this work.

• Exercise extreme caution when working on the machine if the cam is

not at its origin (0 deg.). Recoil of the cam axis can endanger the

operator.

2. Use the cam handle to rotate the cam to 200°.

3. Adjust the sensor so the light beam passes 0.7 to 0.8 mm below the tip of the

nozzle.

4. Actually pick up a part to check the sensor reaction.

Adjustment bolts

Station 2

0.7

~ 0.8 mm

∅0.7 nozzle

Light

beam

CP6M5039

Part 5 Chapter 3 Station Adjustments

Edition 1.0 5-3-21 CP-6-series Mechanical Reference

Sensor Sensitivity Adjustment

1. Break the light beam with a ruler (or something similar) and rotate the amplifier

trimmer to the right until the red LED (A) goes out.

2. Remove the ruler and rotate the trimmer to the left until the red LED (B) lights up.

3. Return the trimmer to a location between (A) and (B).

Red LED

Green LED

Trimmer

(1)

(2)

(3)

SET

(A)

(B)

(A)

CP6M5040

Part 5 Chapter 3 Station Adjustments

Edition 1.0 5-3-22 CP-6-series Mechanical Reference