CP-6-series Mechanical Reference - 第21页
Safety Guidelines Edition 1.5 7 CP-6-series Mechanical Reference Ensure to use the handle when opening or closing the safety doors, fences or covers. ● Opening or closing the safety doors, fences or covers without using …
Safety Guidelines
Edition 1.5 6 CP-6-series Mechanical Reference
Be sure to wear protective glasses.
● Be sure to wear protective glasses.
[Example]
CP-6, -7 nozzles use springs which may be propelled during
disassembly. Be sure to handle the nozzles carefully to prevent eye
injuries.
Check the machine monitor and the target axes
while manually operating the machine.
● When operating the machine, carefully follow the instructions that
are displayed at the machine display.
● Operating the machine without looking at the machine display may
lead to operating errors or result in damage to the machine or
products.
Do not touch the servo amp power terminal for at least
five minutes after turning off the power to the machine.
● The servo amp retains a high voltage even after the power has
been turned off. Always wait at least five minutes, and ensure that
the CHARGE lamp is off, before undertaking any work that may
result in contact with the servo amp terminal.
WARNING
CAUTION
Do not operate the machine after removing or disabling
sensors.
● Removing or disabling sensors will disarm the interlock, leading to
collisions and damage to the machine.
Check the machine display to determine whether
HELPS compatible machines are in the middle of
performing changeover.
● During operation in automatic mode on machines equipped with
automatic changeover equipment, it may be difficult to actually see
automatic changeover taking place from the front of the machine.
When a message appears at the machine display, follow the
instructions that are given.
Safety Guidelines
Edition 1.5 7 CP-6-series Mechanical Reference
Ensure to use the handle when opening or closing the
safety doors, fences or covers.
● Opening or closing the safety doors, fences or covers without using
the handle may result in injury to the hand.
● Opening or closing the safety doors, fences or covers with force,
without using the handle may result in damage to the machine.
CAUTION
Safety Guidelines
Edition 1.5 8 CP-6-series Mechanical Reference
3. Safety Rules for Individual Machine Types
CP-6-series Machines
WARNING
Do not reach into the machine over the rear fence
during operation.
● Body parts or clothing may be caught in the machine causing
personal injury.
Do not enter within the safety fence, even in cases of an
emergency stop.
● When an emergency stop occurs in step mode, power to the servo
amps is only cut after all axes have stopped moving. As a result,
there may be a short delay between the moment the emergency
arises and the power to the servo amps is turn off.
● Do not enter the safety fence immediately following an emergency
stop, body parts or clothing may be caught in the machine causing
personal injury.
Do not operate the machine after removing the
transparent shutters from the D-axis.
● Body parts or clothing may be caught in the machine causing
personal injury.
Do not lean on the in- and out-conveyors during
operation.
● During operation do not lean on or across the in- and out-conveyors
to check the feeders.
Turn the power off when inspecting the cam box.
● When inspecting the upper part of the cam box, turn off the power
to the machine and exercise sufficient caution.