CP-6-series Mechanical Reference - 第22页
Safety Guidelines Edition 1.5 8 CP-6-series Mechanical Reference 3. Safety Rules for Individual Machine T ypes CP-6-series Machines W ARNING Do not reach into the machine over the rear fence during operation. ● Body part…
Safety Guidelines
Edition 1.5 7 CP-6-series Mechanical Reference
Ensure to use the handle when opening or closing the
safety doors, fences or covers.
● Opening or closing the safety doors, fences or covers without using
the handle may result in injury to the hand.
● Opening or closing the safety doors, fences or covers with force,
without using the handle may result in damage to the machine.
CAUTION
Safety Guidelines
Edition 1.5 8 CP-6-series Mechanical Reference
3. Safety Rules for Individual Machine Types
CP-6-series Machines
WARNING
Do not reach into the machine over the rear fence
during operation.
● Body parts or clothing may be caught in the machine causing
personal injury.
Do not enter within the safety fence, even in cases of an
emergency stop.
● When an emergency stop occurs in step mode, power to the servo
amps is only cut after all axes have stopped moving. As a result,
there may be a short delay between the moment the emergency
arises and the power to the servo amps is turn off.
● Do not enter the safety fence immediately following an emergency
stop, body parts or clothing may be caught in the machine causing
personal injury.
Do not operate the machine after removing the
transparent shutters from the D-axis.
● Body parts or clothing may be caught in the machine causing
personal injury.
Do not lean on the in- and out-conveyors during
operation.
● During operation do not lean on or across the in- and out-conveyors
to check the feeders.
Turn the power off when inspecting the cam box.
● When inspecting the upper part of the cam box, turn off the power
to the machine and exercise sufficient caution.
Safety Guidelines
Edition 1.5 9 CP-6-series Mechanical Reference
Make sure the cam is at its origin (0 deg.)
● Exercise extreme caution when working on the machine if the cam
is not at its origin (0 deg.). (The cam may not stop at its origin (0
deg.) in an emergency stop.) Recoil of the cam axis can endanger
the operator.
● If the cam is not at its origin (0 deg.), use a crank to rotate the cam
shaft until the indicator points to 0 degrees.
Do not stare into the laser beam.
● The CP-643E/CP-643ME is equipped with laser type fiber sensors
(class 2). Exercise extreme caution when working in areas where
there is a risk of eye damage from the laser beams.
Do not touch the high voltage section within the
machine's control box.
● The Brown tube section within the machine's control box contains
high voltage wiring. Do not insert your hand or any metal object into
this part as it may cause electrical shock.
WARNING