CP-6-series Mechanical Reference - 第3页

Copyrights All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or reused in an…

CP-6-series

Mechanical Reference

CP-6/6E

CP-6M/6ME

CP-642/642E

CP-642M/642ME

CP-643E

CP-643ME

CP-65/65E

CP-652CE

MEC-CP6S-1.6E

Copyrights

All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual

may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or

reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.

Trademark Rights

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the

following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,

Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the

U.S.A.

Warranty and Liability

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to

any of the following:

• The use of third party parts.

• The use of non-genuine Fuji parts.

• Incorrect settings made by the customer.

• Improper use of Fuji equipment.

Notice

• Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual

without notice.

• Every effort has been made to ensure that this manual is correct in every detail. However,

please contact Fuji in the unlikely event that errors or omissions are detected.

• Fuji Machine Manufacturing Co., Ltd. accepts no liability whatsoever for damages that may

arise as a result of this manual, with the exception of problems that originate in our products.

About This Manual

This manual contains important machine maintenance information for the user.

The manual content is intended for specialized technicians who are familiar with the

systems used in this machine.

Please read this manual carefully in order to ensure safe and efficient machine

maintenance.

This manual has been written for all CP-6-series machine types which are listed on the

front cover. Unless otherwise stated, all explanations apply equally to all machines.

Note that all of CP-6-series machine types are distinguished based on differences in the

PCB size that can be handled by the machine. There are two versions; a 4000 type and

5000 type that are derived based on the relevant PCB size.

CP-65E and CP-652CE are 5000 type machines and the others are 4000 type machines.

Keep this manual close to hand when operating the machine.

Manual Structure

This manual consists of the following twelve parts.

Safety Guidelines

Part 1 Introduction

Part 2 Preparation for Production

Part 3 Routine Maintenance

Part 4 Setup

Part 5 Adjustments

Part 6 I/O

Part 7 Proper Data Measurements

Part 8 Pallet Feeder

Part 9 Carrier Type Loading System

Part 10 Supplementary Information

Appendix Electronic Temperature Controller

About This Manual

Edition 1.6 i CP-6-series Mechanical Reference