CP-6-series Mechanical Reference - 第313页

1. V ibration Reduction Unit (CP-642E, CP-643E) 1.1 Nomenclature The names and locations of the vibration reduction unit’s main components are shown in the illustration below. Parts List Name Q t y Material Remarks CP-64…

Part 10

Supplementary

Information

1. Vibration Reduction Unit (CP-642E, CP-643E)

1.1 Nomenclature

The names and locations of the vibration reduction unit’s main components are shown in

the illustration below.

Parts List

Name Qty Material Remarks

CP-642 vibrationreductionunit 2 SSand other

Pneumatic damper 4 SS and other

Coil spring 8 Spring steel GERB #35

Air piping 2 C3604BDand other SMC

Air manifold 2 SUS304

Conveyor mounting bracket 2 SS

Spring unit 3 (W2Q-434S) GERB

Pneumatic spring 1 (SC-240-1)

Face plate (for pneumatic

spring)

1SS

Leveling valve 1 MMS-232-A-RL

Special adhesive pad 1 - GERB

Main vibration reduction unit

Pneumatic spring

Spring unit

(W2Q-434S)

Spring unit

(W2Q-434S)

Spring unit

(W2Q-434S)

CP6M11001

Part 10 Chapter 1 Vibration Reduction Unit

Edition 1.0 10-1-1 CP-6-series Mechanical Reference

Piping Joint List (Parts provided by manufacturer)

1.2 Purpose & Operating Principle of Unit

Purpose

The purpose of the vibration reduction unit is to minimize machine vibration from being

transmitted to the floor. The spring and air cylinder format used by this unit offers a

significant reduction in floor vibration as compared to previous systems.

Operating Principle

Main vibration reduction unit

Each of the main units are equipped with 4 internal springs used to support the

machine’s right and left ends. Internal air cylinders extend and rub against plates to

dampen machine vibration.

Spring Unit (W2Q-434S)

Spring units utilize the spring force to support the machine.

Pneumatic Spring

The pneumatic spring uses a leveling valve to maintain a constant machine height.

Spring

Air cylinder

Plate

Extension

CP6M11002

Location Part Name Model Qty Manufacturer

Damper inlet Elbow union KQL06-00 1x2

Pneumatic spring Elbowunion KQL06-01S 1

Damper inlet T-union KQT06-00 1x2

Damper T-union KQY06-01S 1x2 SMC

Damper inlet Long elbow KQW06-99 4x2

Damper inlet, manifold Half union KQH06-01S 6x2

Piping Soft nylon (ø4) TS0604B-20 3 m

Piping Soft nylon (ø6) TS0425B-20 3 m

Part 10 Chapter 1 Vibration Reduction Unit

Edition 1.0 10-1-2 CP-6-series Mechanical Reference