CP-6-series Mechanical Reference - 第40页
2. Functions of Each Component CP-Series CP6M1010E Parts mounting system Cam box Index units XY -table Feeders Device tables T ape cutter Pallet feeder Parts camera Mark camera Conveyor Control panel Control box Servo bo…
Note:
Part 1 Chapter 1 Machine Components
Edition 1.1 1-1-6 CP-6-series Mechanical Reference
2. Functions of Each Component
CP-Series
CP6M1010E
Parts mounting system Cam box
Index units
XY-table
Feeders
Device tables
Tape cutter
Pallet feeder
Parts camera
Mark camera
Conveyor
Control panel
Control box
Servo box
Parts supply system
Vision system
Board conveyance
Electrical control system
Pneumatic control system
Placing head
Stations 1-20
VME Rack
Board functions
Part 1 Chapter 2 Functions of Each Component
Edition 1.1 1-2-1 CP-6-series Mechanical Reference
2.1 Parts Mounting System
2.1.1Cam Box
The cam box, located on the upper part of the CP-6, consists of two camshafts, a central
axis, two cam axes, cam levers, air cylinders, two index units and the cam motors that
operate these units. The cam motor is responsible for operating all mechanical station
and feeder functions.
Cam Location
Refer to the figure below for the schematic of the cams and shafts inside of the cam box.
Machine Front
Cam axis A
Theta index unit
Cam axis B
Nozzle index unit
CP6M1011Ea
Station 12 FR θ clutch up/down
Station 13 PR θ clutch up/down
Station 11 nozzle up/down
Station 10 F θ clutch up/down
Station 3 P θ R/L
Station 3 P θ clutch up/down
Station 1 feeder advance
Station 1 waste tape cut
Station 18 change clutch
up/down
Station 13 PR θ R/L
Station 1 nozzle up/down
Part 1 Chapter 2 Functions of Each Component
Edition 1.1 1-2-2 CP-6-series Mechanical Reference