CP-6-series Mechanical Reference - 第90页

Notes: Part 2 Chapter 5 T able Height Adjustment Edition 1.0 2-5-2 CP-6-series Mechanical Reference

5. Table Height Adjustment (CP-642, CP-642M)

Point

Use the slide levers at the front and rear of the XY-table to adjust the table for different

board thicknesses.

By using the slide levers, it is no longer necessary to adjust the height of the back-up pins

when a board of a different thickness is used.

Procedure

WARNING

Turn off the 200 V servo power before carrying out this work.

Loosen both lock screws (front and rear) and use the slide levers to adjust the table to the

thickness of the board. Ensure both slide levers are adjusted. Tighten the lock screws

when the adjustment is complete.

Lifter

Slide lever

Lock screw

CP6M2012

Part 2 Chapter 5 Table Height Adjustment

Edition 1.0 2-5-1 CP-6-series Mechanical Reference

Notes:

Part 2 Chapter 5 Table Height Adjustment

Edition 1.0 2-5-2 CP-6-series Mechanical Reference

Part 3

Routine

Maintenance