00194563_03_E - 第3页
General In for ma tion on C omponents, Standard Noz z les and Adapters Int r oduc tion Introduction
2-Pin Components and Standard Nozzles
Introduction
2-Pin
General Information on Components, Standard Nozzles and Adapters
SOT/TO Components and Standard Nozzles
SO Components and Standard Nozzles
PLCC/SOJ Components and Standard Nozzles
QFP Components and Standard Nozzles
Miscellaneous Components and Standard Nozzles
Special Nozzles (Tested Components)
SOT/TO
SO
PLCC/SOJ
QFP
Special
Nozzles
Miscella-
neous
General Information on Components,
Standard Nozzles and Adapters
Introduction
Introduction
1 – 4
Y
X
Y
X
Y
X
Introduction
The primary aim of this job guide is to make it easier for
commissioning engineers and users of SIPLACE machines
to select nozzles.
You look for the component to be placed (or the package
form) in order to find out the appropriate nozzle to use.
This job guide shows nozzles for SIPLACE machines.
“Calibration Nozzles” you can find on page 1 – 24.
Structure of the Job Guide
This job guide is divided up into separate chapters that deal with different component groups. To aid
orien tation, a sample component of the relevant component group appears on the tab for each chapter.
In the first (left-hand) column on each page you will find the package form specifications of the different
components. On the right you will find the name of the associated package form (GF) file.
In addition, the 0° description of the sample component is shown on page 2 of each chapter.
Here are some examples:
0º
Description
0º
Description
0º
Description