2OM-1150-001_w.pdf - 第152页
异常 异常 异常 异常 异常 ID ID ID ID ID ITEM( ITEM( ITEM( ITEM( ITEM( 项目 项目 项目 项目 项目 ) ) ) ) ) 内容 内容 内容 内容 内容 0705000 0705000 0705000 0705000 0705000 P.E.C.Recog.Camera Y Driver P.E.C.Recog.Camera Y Driver P.E.C.Recog.Camera Y Dri…
异常异常
异常异常
异常
IDID
IDID
ID
ITEM(ITEM(
ITEM(ITEM(
ITEM(
项目项目
项目项目
项目
))
))
)
内容内容
内容内容
内容
05160000516000
05160000516000
0516000
Squeegee Drv.DataSqueegee Drv.Data
Squeegee Drv.DataSqueegee Drv.Data
Squeegee Drv.Data
The data was detected outside of the possible range.The data was detected outside of the possible range.
The data was detected outside of the possible range.The data was detected outside of the possible range.
The data was detected outside of the possible range.
(Squeegee驱动数据)(目的值超出装置的可动范围。)
06010000601000
06010000601000
0601000
P.E.C.Recog.Camera X OriginP.E.C.Recog.Camera X Origin
P.E.C.Recog.Camera X OriginP.E.C.Recog.Camera X Origin
P.E.C.Recog.Camera X Origin
Zeroing opn. was incompleted, within specified time.Zeroing opn. was incompleted, within specified time.
Zeroing opn. was incompleted, within specified time.Zeroing opn. was incompleted, within specified time.
Zeroing opn. was incompleted, within specified time.
(基板识别Camera X原点)(原点复位没有在规定时间内完成。)
06020000602000
06020000602000
0602000
P.E.C.Recog.Camera X OriginP.E.C.Recog.Camera X Origin
P.E.C.Recog.Camera X OriginP.E.C.Recog.Camera X Origin
P.E.C.Recog.Camera X Origin
Detect lost pulse error.Detect lost pulse error.
Detect lost pulse error.Detect lost pulse error.
Detect lost pulse error.
(基板识别Camera X原点)(检出失调。)
06030000603000
06030000603000
0603000
P.E.C.Recog.Camera X OverrunP.E.C.Recog.Camera X Overrun
P.E.C.Recog.Camera X OverrunP.E.C.Recog.Camera X Overrun
P.E.C.Recog.Camera X Overrun
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.
(Overrun) (Plus(+) Overrun检出。)
06040000604000
06040000604000
0604000
P.E.C.Recog.Camera X OverrunP.E.C.Recog.Camera X Overrun
P.E.C.Recog.Camera X OverrunP.E.C.Recog.Camera X Overrun
P.E.C.Recog.Camera X Overrun
(-)Limit error has beed detected.(-)Limit error has beed detected.
(-)Limit error has beed detected.(-)Limit error has beed detected.
(-)Limit error has beed detected.
(Overrun) (Minus(-) Overrun检出。)
06050000605000
06050000605000
0605000
P.E.C.Recog.Camera X DriverP.E.C.Recog.Camera X Driver
P.E.C.Recog.Camera X DriverP.E.C.Recog.Camera X Driver
P.E.C.Recog.Camera X Driver
Driver alarm signal was detected.Driver alarm signal was detected.
Driver alarm signal was detected.Driver alarm signal was detected.
Driver alarm signal was detected.
(基板识别Camera X Servo) (Servo Alarm信号检出。)
06060000606000
06060000606000
0606000
P.E.C.Recog.Camera X DriverP.E.C.Recog.Camera X Driver
P.E.C.Recog.Camera X DriverP.E.C.Recog.Camera X Driver
P.E.C.Recog.Camera X Driver
Driver Emergency Stop InputDriver Emergency Stop Input
Driver Emergency Stop InputDriver Emergency Stop Input
Driver Emergency Stop Input
(基板识别Camera X Servo) ( 驱动的紧急停机输入)
06070000607000
06070000607000
0607000
P.E.C.Recog.Camera X DriverP.E.C.Recog.Camera X Driver
P.E.C.Recog.Camera X DriverP.E.C.Recog.Camera X Driver
P.E.C.Recog.Camera X Driver
Variation counter over flowVariation counter over flow
Variation counter over flowVariation counter over flow
Variation counter over flow
(基板识别Camera X Servo) (偏差Counter的Overflow)
06080000608000
06080000608000
0608000
P.E.C.Recog.Camera X DriverP.E.C.Recog.Camera X Driver
P.E.C.Recog.Camera X DriverP.E.C.Recog.Camera X Driver
P.E.C.Recog.Camera X Driver
Driver Over-HeatDriver Over-Heat
Driver Over-HeatDriver Over-Heat
Driver Over-Heat
(基板识别Camera X Servo) (驱动过热)
06090000609000
06090000609000
0609000
P.E.C.Recog.Camera X DriverP.E.C.Recog.Camera X Driver
P.E.C.Recog.Camera X DriverP.E.C.Recog.Camera X Driver
P.E.C.Recog.Camera X Driver
Operatuon was incompleted, within specified time.Operatuon was incompleted, within specified time.
Operatuon was incompleted, within specified time.Operatuon was incompleted, within specified time.
Operatuon was incompleted, within specified time.
(基板识别Camera X Servo) ( 动作没有在规定时间内结束。)
06100000610000
06100000610000
0610000
P.E.C.Recog.Camera XP.E.C.Recog.Camera X
P.E.C.Recog.Camera XP.E.C.Recog.Camera X
P.E.C.Recog.Camera X
Table-Z Axis is not at origin.Table-Z Axis is not at origin.
Table-Z Axis is not at origin.Table-Z Axis is not at origin.
Table-Z Axis is not at origin.
InterlockInterlock
InterlockInterlock
Interlock(基板识别Camera X) (台Z轴不在原点。)
06110000611000
06110000611000
0611000
P.E.C.Recog.Camera XP.E.C.Recog.Camera X
P.E.C.Recog.Camera XP.E.C.Recog.Camera X
P.E.C.Recog.Camera X
P.C.B.stopper was down.P.C.B.stopper was down.
P.C.B.stopper was down.P.C.B.stopper was down.
P.C.B.stopper was down.
InterlockInterlock
InterlockInterlock
Interlock(基板识别Camera X) (基板Stopper正在下降。)
06120000612000
06120000612000
0612000
P.E.C.Recog.Camera XP.E.C.Recog.Camera X
P.E.C.Recog.Camera XP.E.C.Recog.Camera X
P.E.C.Recog.Camera X
P.C.B.warpage protection was down.P.C.B.warpage protection was down.
P.C.B.warpage protection was down.P.C.B.warpage protection was down.
P.C.B.warpage protection was down.
InterlockInterlock
InterlockInterlock
Interlock(基板识别Camera X) (基板Warpage Protection正在下降。)
06130000613000
06130000613000
0613000
P.E.C.Recog.Camera XP.E.C.Recog.Camera X
P.E.C.Recog.Camera XP.E.C.Recog.Camera X
P.E.C.Recog.Camera X
Cleaning nozzle is up.Cleaning nozzle is up.
Cleaning nozzle is up.Cleaning nozzle is up.
Cleaning nozzle is up.
InterlockInterlock
InterlockInterlock
Interlock(基板识别Camera X) (Cleaning吸嘴正在上升。)
06140000614000
06140000614000
0614000
P.E.C.Recog.Camera XP.E.C.Recog.Camera X
P.E.C.Recog.Camera XP.E.C.Recog.Camera X
P.E.C.Recog.Camera X
P.C.B.was took on table.P.C.B.was took on table.
P.C.B.was took on table.P.C.B.was took on table.
P.C.B.was took on table.
InterlockInterlock
InterlockInterlock
Interlock(基板识别Camera X) (台上有基板。)
06150000615000
06150000615000
0615000
P.E.C.Recog.Camera X TimingP.E.C.Recog.Camera X Timing
P.E.C.Recog.Camera X TimingP.E.C.Recog.Camera X Timing
P.E.C.Recog.Camera X Timing
Task has not been completed unable to continue.Task has not been completed unable to continue.
Task has not been completed unable to continue.Task has not been completed unable to continue.
Task has not been completed unable to continue.
(基板识别Camera X Timing) ( 想动作时，装置不在停机状态。)
06160000616000
06160000616000
0616000
P.E.C.Recog.Camera X DataP.E.C.Recog.Camera X Data
P.E.C.Recog.Camera X DataP.E.C.Recog.Camera X Data
P.E.C.Recog.Camera X Data
The data was detected outside of the possible range.The data was detected outside of the possible range.
The data was detected outside of the possible range.The data was detected outside of the possible range.
The data was detected outside of the possible range.
(基板识别Camera X数据)(目的值超出装置的可动范围。)
06170000617000
06170000617000
0617000
P.E.C.Recog.Camera X OriginP.E.C.Recog.Camera X Origin
P.E.C.Recog.Camera X OriginP.E.C.Recog.Camera X Origin
P.E.C.Recog.Camera X Origin
Zeroing Opn. Not Complete.Zeroing Opn. Not Complete.
Zeroing Opn. Not Complete.Zeroing Opn. Not Complete.
Zeroing Opn. Not Complete.
(基板识别Camera X原点)(还在做原点复位)
07010000701000
07010000701000
0701000
P.E.C.Recog.Camera P.E.C.Recog.Camera
P.E.C.Recog.Camera P.E.C.Recog.Camera
P.E.C.Recog.Camera
YY
YY
Y
Origin Origin
Origin Origin
Origin
Zeroing opn. was incompleted, within specified time.Zeroing opn. was incompleted, within specified time.
Zeroing opn. was incompleted, within specified time.Zeroing opn. was incompleted, within specified time.
Zeroing opn. was incompleted, within specified time.
(基板识别Camera Y原点)(原点复位没有在规定时间内完成。)
07020000702000
07020000702000
0702000
P.E.C.Recog.Camera P.E.C.Recog.Camera
P.E.C.Recog.Camera P.E.C.Recog.Camera
P.E.C.Recog.Camera
YY
YY
Y
Origin Origin
Origin Origin
Origin
Detect lost pulse error.Detect lost pulse error.
Detect lost pulse error.Detect lost pulse error.
Detect lost pulse error.
(基板识别Camera Y原点)(检出失调。)
07030000703000
07030000703000
0703000
P.E.C.Recog.Camera Y OverrunP.E.C.Recog.Camera Y Overrun
P.E.C.Recog.Camera Y OverrunP.E.C.Recog.Camera Y Overrun
P.E.C.Recog.Camera Y Overrun
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.
(基板识别Camera Y Overrun) (Plus(+) overrun检出。)
07040000704000
07040000704000
0704000
P.E.C.Recog.Camera Y OverrunP.E.C.Recog.Camera Y Overrun
P.E.C.Recog.Camera Y OverrunP.E.C.Recog.Camera Y Overrun
P.E.C.Recog.Camera Y Overrun
(-)Limit error has beed detected.(-)Limit error has beed detected.
(-)Limit error has beed detected.(-)Limit error has beed detected.
(-)Limit error has beed detected.
(基板识别Camera Y Overrun) (Minus(-) overrun检出。)
2.3 2.3
2.3 2.3
2.3
异常异常
异常异常
异常
IDID
IDID
ID
和复原方法和复原方法
和复原方法和复原方法
和复原方法
0008-001 2章2-12 AFQ01JTRP
异常异常
异常异常
异常
IDID
IDID
ID
ITEM( ITEM(
ITEM( ITEM(
ITEM(
项目项目
项目项目
项目
))
))
)
内容内容
内容内容
内容
07050000705000
07050000705000
0705000
P.E.C.Recog.Camera Y DriverP.E.C.Recog.Camera Y Driver
P.E.C.Recog.Camera Y DriverP.E.C.Recog.Camera Y Driver
P.E.C.Recog.Camera Y Driver
Driver alarm signal was detected.Driver alarm signal was detected.
Driver alarm signal was detected.Driver alarm signal was detected.
Driver alarm signal was detected.
(基板识别Camera Y Servo) (Servo Alarm信号检出。)
07060000706000
07060000706000
0706000
P.E.C.Recog.Camera Y DriverP.E.C.Recog.Camera Y Driver
P.E.C.Recog.Camera Y DriverP.E.C.Recog.Camera Y Driver
P.E.C.Recog.Camera Y Driver
Driver Emergency Stop InputDriver Emergency Stop Input
Driver Emergency Stop InputDriver Emergency Stop Input
Driver Emergency Stop Input
(基板识别Camera Y Servo) ( 驱动的紧急停机输入)
07070000707000
07070000707000
0707000
P.E.C.Recog.Camera Y DriverP.E.C.Recog.Camera Y Driver
P.E.C.Recog.Camera Y DriverP.E.C.Recog.Camera Y Driver
P.E.C.Recog.Camera Y Driver
Variation counter over flowVariation counter over flow
Variation counter over flowVariation counter over flow
Variation counter over flow
(基板识别Camera Y Servo) (偏差Counter的Overflow)
07080000708000
07080000708000
0708000
P.E.C.Recog.Camera Y DriverP.E.C.Recog.Camera Y Driver
P.E.C.Recog.Camera Y DriverP.E.C.Recog.Camera Y Driver
P.E.C.Recog.Camera Y Driver
Driver Over-HeatDriver Over-Heat
Driver Over-HeatDriver Over-Heat
Driver Over-Heat
(基板识别Camera Y Servo) (驱动过热)
07090000709000
07090000709000
0709000
P.E.C.Recog.Camera Y DriverP.E.C.Recog.Camera Y Driver
P.E.C.Recog.Camera Y DriverP.E.C.Recog.Camera Y Driver
P.E.C.Recog.Camera Y Driver
Operatuon was incompleted, within specified time.Operatuon was incompleted, within specified time.
Operatuon was incompleted, within specified time.Operatuon was incompleted, within specified time.
Operatuon was incompleted, within specified time.
(基板识别Camera Y Servo) ( 动作没有在规定时间内结束。)
07100000710000
07100000710000
0710000
P.E.C.Recog.Camera Y InterlockP.E.C.Recog.Camera Y Interlock
P.E.C.Recog.Camera Y InterlockP.E.C.Recog.Camera Y Interlock
P.E.C.Recog.Camera Y Interlock
Table-Z Axis is not at origin.Table-Z Axis is not at origin.
Table-Z Axis is not at origin.Table-Z Axis is not at origin.
Table-Z Axis is not at origin.
(
基板识别Camera Y Interlock
)(台Z轴不在原点。)
07110000711000
07110000711000
0711000
P.E.C.Recog.Camera Y InterlockP.E.C.Recog.Camera Y Interlock
P.E.C.Recog.Camera Y InterlockP.E.C.Recog.Camera Y Interlock
P.E.C.Recog.Camera Y Interlock
P.C.B.stopper was down.P.C.B.stopper was down.
P.C.B.stopper was down.P.C.B.stopper was down.
P.C.B.stopper was down.
(
基板识别Camera Y Interlock
)(基板Stopper正在下降。)
0712000 0712000
0712000 0712000
0712000
P.E.C.Recog.Camera Y InterlockP.E.C.Recog.Camera Y Interlock
P.E.C.Recog.Camera Y InterlockP.E.C.Recog.Camera Y Interlock
P.E.C.Recog.Camera Y Interlock
P.C.B.warpage protection was down.P.C.B.warpage protection was down.
P.C.B.warpage protection was down.P.C.B.warpage protection was down.
P.C.B.warpage protection was down.
(
基板识别Camera Y Interlock
)(基板Warpage Protection正在下降。)
07130000713000
07130000713000
0713000
P.E.C.Recog.Camera Y InterlockP.E.C.Recog.Camera Y Interlock
P.E.C.Recog.Camera Y InterlockP.E.C.Recog.Camera Y Interlock
P.E.C.Recog.Camera Y Interlock
Cleaning nozzle is up.Cleaning nozzle is up.
Cleaning nozzle is up.Cleaning nozzle is up.
Cleaning nozzle is up.
(
基板识别Camera Y Interlock
) (Cleaning吸嘴正在上升。)
07140000714000
07140000714000
0714000
P.E.C.Recog.Camera Y P.E.C.Recog.Camera Y
P.E.C.Recog.Camera Y P.E.C.Recog.Camera Y
P.E.C.Recog.Camera Y
TimingTiming
TimingTiming
Timing
Task has not been completed unable to continue.Task has not been completed unable to continue.
Task has not been completed unable to continue.Task has not been completed unable to continue.
Task has not been completed unable to continue.
(基板识别Camera Y Timing) ( 想动作时，装置不在停机状态。)
07150000715000
07150000715000
0715000
P.E.C.Recog.Camera Y DataP.E.C.Recog.Camera Y Data
P.E.C.Recog.Camera Y DataP.E.C.Recog.Camera Y Data
P.E.C.Recog.Camera Y Data
TheThe
TheThe
The
datadata
datadata
data
waswas
waswas
was
detecteddetected
detecteddetected
detected
outsideoutside
outsideoutside
outside
ofof
ofof
of
thethe
thethe
the
possiblepossible
possiblepossible
possible
range.range.
range.range.
range.
(基板识别Camera Y 数据)(目的值超出装置的可动范围。)
07160000716000
07160000716000
0716000
P.E.C.Recog.Camera Y OriginP.E.C.Recog.Camera Y Origin
P.E.C.Recog.Camera Y OriginP.E.C.Recog.Camera Y Origin
P.E.C.Recog.Camera Y Origin
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.
(基板识别Camera Y 原点)(还在做原点复位)
08010000801000
08010000801000
0801000
Screen Recog.Camera X OriginScreen Recog.Camera X Origin
Screen Recog.Camera X OriginScreen Recog.Camera X Origin
Screen Recog.Camera X Origin
Zeroing opn.was incompleted, within specified time.Zeroing opn.was incompleted, within specified time.
Zeroing opn.was incompleted, within specified time.Zeroing opn.was incompleted, within specified time.
Zeroing opn.was incompleted, within specified time.
(屏幕识别Camera X 原点)(原点复位没有在规定时间内完成。)
08020000802000
08020000802000
0802000
Screen Recog.Camera X OriginScreen Recog.Camera X Origin
Screen Recog.Camera X OriginScreen Recog.Camera X Origin
Screen Recog.Camera X Origin
Detect lost pulse error.Detect lost pulse error.
Detect lost pulse error.Detect lost pulse error.
Detect lost pulse error.
(屏幕识别Camera X 原点)(检出失调。)
08030000803000
08030000803000
0803000
Screen Recog.Camera X OverrunScreen Recog.Camera X Overrun
Screen Recog.Camera X OverrunScreen Recog.Camera X Overrun
Screen Recog.Camera X Overrun
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.
(屏幕识别Camera X Overrun) (Plus(+) Overrun检出。)
08040000804000
08040000804000
0804000
Screen Recog.Camera X OverrunScreen Recog.Camera X Overrun
Screen Recog.Camera X OverrunScreen Recog.Camera X Overrun
Screen Recog.Camera X Overrun
(-)Limit error has beed detected.(-)Limit error has beed detected.
(-)Limit error has beed detected.(-)Limit error has beed detected.
(-)Limit error has beed detected.
(屏幕识别Camera X Overrun) (Minus(-) Overrun检出。)
08050000805000
08050000805000
0805000
Screen Recog.Camera X DriverScreen Recog.Camera X Driver
Screen Recog.Camera X DriverScreen Recog.Camera X Driver
Screen Recog.Camera X Driver
Driver alarm signal was detected.Driver alarm signal was detected.
Driver alarm signal was detected.Driver alarm signal was detected.
Driver alarm signal was detected.
(屏幕识别Camera X Servo) (Servo Alarm信号检出。)
08060000806000
08060000806000
0806000
Screen Recog.Camera X DriverScreen Recog.Camera X Driver
Screen Recog.Camera X DriverScreen Recog.Camera X Driver
Screen Recog.Camera X Driver
Driver Emergency Stop InputDriver Emergency Stop Input
Driver Emergency Stop InputDriver Emergency Stop Input
Driver Emergency Stop Input
(屏幕识别Camera X Servo) ( 驱动的紧急停机输入)
08070000807000
08070000807000
0807000
Screen Recog.Camera X DriverScreen Recog.Camera X Driver
Screen Recog.Camera X DriverScreen Recog.Camera X Driver
Screen Recog.Camera X Driver
Variation counter over flowVariation counter over flow
Variation counter over flowVariation counter over flow
Variation counter over flow
(屏幕识别Camera X Servo) (偏差Counter的Overflow)
08080000808000
08080000808000
0808000
Screen Recog.Camera X DriverScreen Recog.Camera X Driver
Screen Recog.Camera X DriverScreen Recog.Camera X Driver
Screen Recog.Camera X Driver
Driver Over-HeatDriver Over-Heat
Driver Over-HeatDriver Over-Heat
Driver Over-Heat
(屏幕识别Camera X Servo) (驱动过热)
08090000809000
08090000809000
0809000
Screen Recog.Camera X DriverScreen Recog.Camera X Driver
Screen Recog.Camera X DriverScreen Recog.Camera X Driver
Screen Recog.Camera X Driver
Operatuon was incompleted, within specified time.Operatuon was incompleted, within specified time.
Operatuon was incompleted, within specified time.Operatuon was incompleted, within specified time.
Operatuon was incompleted, within specified time.
(屏幕识别Camera X Servo) ( 动作没有在规定时间内结束。)
08100000810000
08100000810000
0810000
Screen Recog.Camera X InterlockScreen Recog.Camera X Interlock
Screen Recog.Camera X InterlockScreen Recog.Camera X Interlock
Screen Recog.Camera X Interlock
(屏幕识别Camera X Interlock)
08110000811000
08110000811000
0811000
Screen Recog.Camera X TimingScreen Recog.Camera X Timing
Screen Recog.Camera X TimingScreen Recog.Camera X Timing
Screen Recog.Camera X Timing
Task has not been completed unable to continue.Task has not been completed unable to continue.
Task has not been completed unable to continue.Task has not been completed unable to continue.
Task has not been completed unable to continue.
(屏幕识别Camera X Timing) ( 想动作时，装置不在停机状态。)
2.3 2.3
2.3 2.3
2.3
异常异常
异常异常
异常
IDID
IDID
ID
和复原方法和复原方法
和复原方法和复原方法
和复原方法
0008-001 2章2-13 AFQ01JTRP
异常异常
异常异常
异常
IDID
IDID
ID
ITEM(ITEM(
ITEM(ITEM(
ITEM(
项目项目
项目项目
项目
))
))
)
内容内容
内容内容
内容
081200081200
081200081200
081200
Screen Recog.Camera X DataScreen Recog.Camera X Data
Screen Recog.Camera X DataScreen Recog.Camera X Data
Screen Recog.Camera X Data
The data was detected outside of the possible range.The data was detected outside of the possible range.
The data was detected outside of the possible range.The data was detected outside of the possible range.
The data was detected outside of the possible range.
(屏幕识别Camera X数据)(目的值超出装置的可动范围。)
08130000813000
08130000813000
0813000
Screen Recog.Camera X DataScreen Recog.Camera X Data
Screen Recog.Camera X DataScreen Recog.Camera X Data
Screen Recog.Camera X Data
Pulse read error.Pulse read error.
Pulse read error.Pulse read error.
Pulse read error.
(屏幕识别Camera X数据) (Pulse值速读失败。)
08140000814000
08140000814000
0814000
Screen Recog.Camera X OriginScreen Recog.Camera X Origin
Screen Recog.Camera X OriginScreen Recog.Camera X Origin
Screen Recog.Camera X Origin
Zeroing Opn.Not Complete.Zeroing Opn.Not Complete.
Zeroing Opn.Not Complete.Zeroing Opn.Not Complete.
Zeroing Opn.Not Complete.
(屏幕识别Camera X原点)(还在做原点复位)
09010000901000
09010000901000
0901000
PCB Backup Axis OriginPCB Backup Axis Origin
PCB Backup Axis OriginPCB Backup Axis Origin
PCB Backup Axis Origin
Zeroing opn.was incompleted, within specified time.Zeroing opn.was incompleted, within specified time.
Zeroing opn.was incompleted, within specified time.Zeroing opn.was incompleted, within specified time.
Zeroing opn.was incompleted, within specified time.
(基板Back-Up轴原点)(原点复位没有在规定时间内完成。)
09020000902000
09020000902000
0902000
PCB Backup Axis OriginPCB Backup Axis Origin
PCB Backup Axis OriginPCB Backup Axis Origin
PCB Backup Axis Origin
Detect lost pulse error.Detect lost pulse error.
Detect lost pulse error.Detect lost pulse error.
Detect lost pulse error.
(基板Back-Up轴原点)(检出失调。)
09030000903000
09030000903000
0903000
PCB Backup Axis OverrunPCB Backup Axis Overrun
PCB Backup Axis OverrunPCB Backup Axis Overrun
PCB Backup Axis Overrun
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.
(基板Back-Up轴Overrun) (Plus(+) Overrun检出。)
09040000904000
09040000904000
0904000
PCB Backup Axis OverrunPCB Backup Axis Overrun
PCB Backup Axis OverrunPCB Backup Axis Overrun
PCB Backup Axis Overrun
(-)Limit error has beed detected.(-)Limit error has beed detected.
(-)Limit error has beed detected.(-)Limit error has beed detected.
(-)Limit error has beed detected.
(基板Back-Up轴Overrun) (Minus(-) Overrun检出。)
09050000905000
09050000905000
0905000
PCB Backup Axis DriverPCB Backup Axis Driver
PCB Backup Axis DriverPCB Backup Axis Driver
PCB Backup Axis Driver
Driver alarm signal was detected.Driver alarm signal was detected.
Driver alarm signal was detected.Driver alarm signal was detected.
Driver alarm signal was detected.
(基板Back-Up轴驱动) (Servo Alarm信号检出。)
09060000906000
09060000906000
0906000
PCB Backup Axis DriverPCB Backup Axis Driver
PCB Backup Axis DriverPCB Backup Axis Driver
PCB Backup Axis Driver
Driver Emergency Stop InputDriver Emergency Stop Input
Driver Emergency Stop InputDriver Emergency Stop Input
Driver Emergency Stop Input
(基板Back-Up轴驱动)(驱动的紧急停机输入)
09070000907000
09070000907000
0907000
PCB Backup Axis DriverPCB Backup Axis Driver
PCB Backup Axis DriverPCB Backup Axis Driver
PCB Backup Axis Driver
Variation counter over flowVariation counter over flow
Variation counter over flowVariation counter over flow
Variation counter over flow
(基板Back-Up轴驱动)(偏差Counter的Overflow)
09080000908000
09080000908000
0908000
PCB Backup Axis DriverPCB Backup Axis Driver
PCB Backup Axis DriverPCB Backup Axis Driver
PCB Backup Axis Driver
Driver Over-HeatDriver Over-Heat
Driver Over-HeatDriver Over-Heat
Driver Over-Heat
(基板Back-Up轴驱动)(驱动过热)
09090000909000
09090000909000
0909000
PCB Backup Axis DriverPCB Backup Axis Driver
PCB Backup Axis DriverPCB Backup Axis Driver
PCB Backup Axis Driver
Operatuon was incompleted, within specified time.Operatuon was incompleted, within specified time.
Operatuon was incompleted, within specified time.Operatuon was incompleted, within specified time.
Operatuon was incompleted, within specified time.
(基板Back-Up轴驱动)(动作没有在规定时间内结束。)
09100000910000
09100000910000
0910000
PCB Backup Axis InterlockPCB Backup Axis Interlock
PCB Backup Axis InterlockPCB Backup Axis Interlock
PCB Backup Axis Interlock
Table-Z Axis is not at safety area.Table-Z Axis is not at safety area.
Table-Z Axis is not at safety area.Table-Z Axis is not at safety area.
Table-Z Axis is not at safety area.
(基板Back-Up轴 Interlock) (台Z轴不在Saftey Area。)
09110000911000
09110000911000
0911000
PCB Backup Axis TimingPCB Backup Axis Timing
PCB Backup Axis TimingPCB Backup Axis Timing
PCB Backup Axis Timing
Task has not been completed unable to continue.Task has not been completed unable to continue.
Task has not been completed unable to continue.Task has not been completed unable to continue.
Task has not been completed unable to continue.
(基板Back-Up轴Timing) (想动作时，装置不在停机状态。)
09120000912000
09120000912000
0912000
PCB Backup Axis DataPCB Backup Axis Data
PCB Backup Axis DataPCB Backup Axis Data
PCB Backup Axis Data
The data was detected outside of the possible range.The data was detected outside of the possible range.
The data was detected outside of the possible range.The data was detected outside of the possible range.
The data was detected outside of the possible range.
(基板Back-Up轴数据)(目的值超出装置的可动范围。)
09130000913000
09130000913000
0913000
PCB Backup Axis OriginPCB Backup Axis Origin
PCB Backup Axis OriginPCB Backup Axis Origin
PCB Backup Axis Origin
Zeroing Opn.Not Complete.Zeroing Opn.Not Complete.
Zeroing Opn.Not Complete.Zeroing Opn.Not Complete.
Zeroing Opn.Not Complete.
(基板Back-Up轴原点)(还在做原点复位)
10010001 001 000
10010001 001 000
1001000
Table Chute Width OriginTable Chute Width Origin
Table Chute Width OriginTable Chute Width Origin
Table Chute Width Origin
Zeroing opn.was incompleted, within specified time.Zeroing opn.was incompleted, within specified time.
Zeroing opn.was incompleted, within specified time.Zeroing opn.was incompleted, within specified time.
Zeroing opn.was incompleted, within specified time.
(台Chute宽幅原点)(原点复位没有在规定时间内完成。)
10020001002000
10020001002000
1002000
Table Chute Width OriginTable Chute Width Origin
Table Chute Width OriginTable Chute Width Origin
Table Chute Width Origin
Detect lost pulse error.Detect lost pulse error.
Detect lost pulse error.Detect lost pulse error.
Detect lost pulse error.
(台Chute宽幅原点)(检出失调。)
101 90001 019000
101 90001 019000
101 9000
Table Chute Width OriginTable Chute Width Origin
Table Chute Width OriginTable Chute Width Origin
Table Chute Width Origin
Zeroing Opn. Not Complete.Zeroing Opn. Not Complete.
Zeroing Opn. Not Complete.Zeroing Opn. Not Complete.
Zeroing Opn. Not Complete.
(台Chute宽幅原点)(还在做原点复位)
10030001003000
10030001003000
1003000
Table Chute Width OverrunTable Chute Width Overrun
Table Chute Width OverrunTable Chute Width Overrun
Table Chute Width Overrun
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.(+)Limit error has beed detected.
(+)Limit error has beed detected.
(台Chute宽幅Overrun) (Plus(+) Overrun检出。)
10040001004000
10040001004000
1004000
Table Chute Width OverrunTable Chute Width Overrun
Table Chute Width OverrunTable Chute Width Overrun
Table Chute Width Overrun
(-)Limit error has beed detected.(-)Limit error has beed detected.
(-)Limit error has beed detected.(-)Limit error has beed detected.
(-)Limit error has beed detected.
(台Chute宽幅Overrun) (Minus(-) Overrun检出。)
2.3 2.3
2.3 2.3
2.3
异常异常
异常异常
异常
IDID
IDID
ID
和复原方法和复原方法
和复原方法和复原方法
和复原方法
0008-001 2章2-14 AFQ01JTRP