XPM2-Site_Preparation - 第3页

Site Preparation & Installation Section: 1 Page: 3 Revision Date: April 2005 1. COMPANY INFORAMTION Vitronics Soltec 2 Marin Way Stratham, NH 03885 USA Phone: 603-772-7778 Fax: 603-772-7776 www.vitronics-soltec.com T…

Site Preparation & Installation Section: 1 Page: 2 Revision Date: April 2005

Table of Contents

Section 1: General Use & Safety Information

COMPANY INFORAMTION......................................................................................................................3

SAFETY INFORMATION..........................................................................................................................3

SYMBOLS.................................................................................................................................................3

WORKING AREA .....................................................................................................................................4

HAZARDS.................................................................................................................................................4

GENERAL HAZARD LOCATIONS ..........................................................................................................7

BUILT-IN SAFETY FEATURES ...............................................................................................................8

DESCRIPTION OF SYMBOLS USED......................................................................................................9

Section 2: Site Preparation & Installation

SITE PREPARATION CHECKLIST........................................................................................................10

ROOM PLANNING .................................................................................................................................11

Oven Clearances...................................................................................................................................11

FACILITY SERVICES & CONNECTIONS..............................................................................................13

Exhaust Specifications.........................................................................................................................13

Electrical Power.....................................................................................................................................15

Nitrogen Supply (optional)...................................................................................................................17

Compressed Air Supply........................................................................................................................18

External Coolant Supply.......................................................................................................................18

OVEN RECEIPT & HANDLING.............................................................................................................19

Receiving Inspection ............................................................................................................................19

Unpacking the Oven..............................................................................................................................20

Positioning & Pre-Leveling the Oven..................................................................................................21

Connect the Hood Interlock Switch.....................................................................................................21

Connecting The Computer System .....................................................................................................22

Site Preparation & Installation Section: 1 Page: 3 Revision Date: April 2005

1. COMPANY INFORAMTION

Vitronics Soltec

2 Marin Way

Stratham, NH 03885

USA

Phone: 603-772-7778

Fax: 603-772-7776

www.vitronics-soltec.com

This manual applies to the XPM

Series Reflow Oven as described by Vitronics Soltec specification

GS-327

2. SAFETY INFORMATION

This manual is not intended as a substitute for proper technical training or educational background in the

combination of technologies in the reflow oven. An appropriate understanding and use of industrial safety

procedures when working around the oven in absolutely necessary.

It is the responsibility of the end user to ensure that only qualified personnel

should be allowed to work on the equipment.

• The Oven is primarily designed to be used for soldering printed circuit assemblies. The oven should

be integrated with an automatic conveyor to load and unload printed circuit assemblies. Other uses

within the machine specifications may permitted, consult with Vitronics Soltec Application Engineering

for specific applications outside of this normal process.

• VS has taken precautions to prevent injury however certain operations are inherently hazardous.

Additional precautions must be taken for certain instances such as manual loading or unloading of the

conveyor, manually clearing products, operation of the UPS (if equipped) during a power failure.

• Safety features provide safe operating and working conditions for both the operator and service

personnel as well as preventing damage to the machine.

• Adherence to the local laws governing health and safety at the installation site are the responsibility of

the end user.

• All users must be trained in the proper use of Personal Protection Equipment and Lock-Out/Tag-Out

procedures where required.

3. SYMBOLS

Safety symbols used throughout this manual follow ISO 3864 the International Standard for Safety

Colors and Safety Signs

WARNING: Yellow triangle with black graphic

This is an example of a symbol which identifies a hazard could cause personal

injury.

REQUIRED ACTION: Blue circle with white graphic

This is an example of a symbol which shows an action that should be taken to

avoid the hazard.

Site Preparation & Installation Section: 1 Page: 4 Revision Date: April 2005

PROHIBITIVE ACTION: Red circled outline and slash over graphic.

This is an example of a symbol that calls attention to an action that is prohibited.

4. WORKING AREA

This equipment is normally run as a station within a conveyorized line. The operator will interact with

the PC terminal to change recipes or to monitor oven status. Access to the doors on the four corners

may be required for activities such as starting the PC, filling the lubrication tank, or adjusting the

pneumatic flow.

Additional maintenance beyond these actions, whether preventative or unplanned must be performed

by a qualified technician. Review the hazards section below to understand the hazardous areas on

the machine and how to avoid or isolate the energy which they contain.

Users working on the machine may need to use Personal Protective Equipment such as gloves,

respirators, or goggles.

5. HAZARDS

The Vitronics Soltec XPM

Reflow Soldering System is a piece of industrial equipment which could

present a variety of hazards to which workers may be exposed to under certain conditions.

HIGH VOLTAGE WARNING: High voltages are present in this area and can

cause personal injury. See the machine serial number plaque for the designated

supply voltage for each specific oven.

• To avoid exposure to high voltages ensure that all protective panels remain

closed during operation.

• Only qualified electricians should work on the electrical circuits of the

machine.

• Before working on an electrical circuit, turn main power off use appropriate

energy isolation and lock out procedures when servicing the machine.

• Ensure that the system is properly grounded.

HOT SURFACES: There is always a risk of being burned when you work around

the machine. Hot surfaces on the oven can cause burns.

• Always wear heat resistant gloves and protective clothing when working on

the machine.

• Never handle the finished boards without wearing protective gloves.

• If possible allow the machine time to cool down before you start servicing.

Most of the components in the soldering system don’t look hot. Always

assume that all parts are hot.