00197623-03_VD_708.1_SP2_DE_EN - 第38页

Station Software 7 08.1 SP2 / Version Description Ausgabe 10/2015 E dition 38 D1 - 109862101 There were pickup pr oblems for 02 01 components at one location. D1 - 109891701 There was an error me ssage during s hutdown o…

Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition

D1-108297901

eSW: the machine stopped with an unspecified hardware error and had to be

rebooted.

D1-108383021

The vacuum pump remained switched on even if it was switched off via the I/O

modules.

D1-108426841 eSW: the machine displayed X-axis error on gantry 4. After restart it was ok.

D1-108455001 The software did not start up completely and hung up during initialization.

D1-108496411

eSW: the single cores of the CPP placement head were changed but after a

firmware upgrade (automatic download) the head could not be detected.

D1-108559341

After having taught the pick-up position and sent the program, the head was

not able to pick up anymore.

D1-108559398 Sporadically, there was a placement offset on gantry 3.

D1-108677601

D1-110870801

eSW: Twin Head z-axis: counting error after head reconfiguration and

software update.

D1-108708401 The machine stopped for inspection.

D1-108750699 There was an unhandled exception.

D1-108751200 The field for placements was too small in the error statistics data.

D1-108776801 The nozzle changer calibration was not accepted during production.

D1-108800201 After pickup, the DP-axis did not move back and touched the conveyor.

D1-108838601 Error message 30001 internal software malfunction was displayed.

D1-109024401 After an unplanned shutdown, the pickup offset was set to 1 mm for all tracks.

D1-109282694 During production the pitch of the feeder changed automatically.

D1-109290501

The 31816 Error setting feeder display error was displayed at

every pickup from a 2x8 mm X-feeder.

D1-109291702

The GUI displayed Waiting until gantry stopped but nothing

happened; on the station software console an unhandled exception was

displayed.

D1-109325101 A SIPLACE X4 S placement machine could not be shut down regularly.

D1-109326037 There were too many restarts after eSW download.

D1-109367901

A machine stopped during the nightly endurance run without error message

(problems with the CIN card).

D1-109380901 There was a message that there was not enough power.

D1-109437541

It was not possible to measure the current sensor value for the C&P20 P

placement head.

D1-109449301

D1-111516325

The software hung up during the SMEMA check and the machine had to be

restarted.

D1-109780901

03015 component could not be placed due to wrong component sensor

values.

D1-109782901 After a reboot, the reference run did not work.

Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition

D1-109862101 There were pickup problems for 0201 components at one location.

D1-109891701 There was an error message during shutdown of the machine.

D1-109921701

eSW: Siplace Advanced Board – incompatible interface between station

software versions 707 and 708.

D1-109921741 eSW: the board was not transferred from PA1 to PA2.

D1-109928675

D1-109928627

After having taught the pickup position the GUI disappeared.

D1-110015401 Test bench inspection: the z-axis did not reach the target position.

D1-110056326

The feeding axis target position was outside the range on certain trays of the

MTC when the last component was in the top right corner.

D1-110116301

The new "orientation check by operator" option checked all trays even if they

were not verified (because they were empty).

D1-110263201 The software disappeared when the "watchdog timer" was selected.

D1-110280401

The following warning was displayed on the GUI: Communication problem

with the processor of the axis control of y axis at gantry 1.

D1-110364201 Error message position out of range at job change.

D1-110375701 3D-sensor calibration did not work.

D1-110379151 There was a 3D vision error (vision communication was interrupted).

D1-110405601

During production, the 32602 The software has stopped unexpectedly. Shut

down Windows, then restart the station error message was displayed.

D1-110413901

D17862-3607

The filling levels of the packaging units could not be edited anymore.

D1-110414201 Unhandled exception during machine mapping.

D1-110558301

The "Shield" component (118 x 48 mm) was rotated 180° after pickup during

teaching.

D1-110563301

A long gripper (110 mm) on Segment 2 was touched by the black cover plate

of Segment 1 and rejected.

D1-110631301

eSW: the tables 3 and 4 were not displayed on the GUI although they were

mounted.

D1-110632301 It was not possible to calibrate the z-axis on gantry 1/segment 1.

D1-110804201

An automatic bug report could not be created on the GUI after the 40034 error

(only 4 digits allowed for error number).

D1-110826705

eSW: during the nozzle change the Overlapping of star and z axis,

gantry 1, CP20a

error occurred.

D1-110855747

After a restart, the machine could not be moved to the service position of the

star and DP-axes.

D1-110857487 Nozzle scan was not in the center what led to a high reject rate.

D1-110864601

eSW: there was an unexpected restart of the subsystem after having

downloaded the eSW of the feeder.

Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition

D1-110888501 Error 42416 came up with HF1 on some machines.

D1-110889301

eSW: gantry 1 was waiting until stopped; the machine hung and had

to be rebooted.

D1-110889341

eSW: the vacuum was not sufficient, all DPs got disabled and there was no

more communication with the star.

D1-110988210 Synchronous dual conveyor mode ran asynchronous.

D1-110991201

Nach einem behobenen Transportfehler blinkte die weiße Lampe an Stellplatz

1 immer noch und der Status konnte nicht zurückgesetzt werden.

D1-111020501

An offset correction for the SST47 was not possible, as manually set values

were not used.

D1-111491101 Gantry 3 was waiting above the placement position and nothing happened.

D1-111551707

After a restart, the 30554 Subsystem is not responding error was

issued by the WPC6 loading axis although the WPC functioned correctly.

D1-111551756 After a restart of the machine the 41304 error was displayed.

D1-111839301 Error 32602: the machine stopped during the centering of the nozzles.

D1-112035501

The software hung up due to the disconnection of control software port 49000

in localhost.

D1-84084601

The display of the sticks (2 on one feeder) on the linear feeder was not

correct.

D1-86607201 The station software did not support the Unicode font in all cases.

D1-87545901

D1-108277201

Risk of collision between tray feeder with high components and CPP

placement head.

D1-92074901 After the manual tray had been refilled, the fiducials were not remeasured.

D1-93537601 On a SIPLACE SX2 V2 placement machine (Gantry 1: Twin Head, Gantry 2:

C&P12 placement head) the real performance was appr. 12 % lower as the

optimized performance.

D1-97080801 The pickup location was displayed in red in the main view.

D1-97968449 A component could not be placed due to a timeout error for the DP-axis.

D17651-2207 After a product change, the feeder settings were not downloaded.

D17687-10301

The sensor rail on track 2 touched the board support when the conveyor width

was enlarged.

D17723-4901

OIS 11.2 displayed the "waiting time" state for PA1 but it should be "blocked

time".

D17739-5083 eSW: the X-feeder had no power at track 29.

D17753-12301 No error history regarding transport errors was logged at the station.

D17758-4401 Sporadically, the software hung up and the machine had to be rebooted.

D17768-2301 Machine stopped without error message during normal processing.

D17791-1277 The station software GUI was hidden and could not be operated.