00197623-03_VD_708.1_SP2_DE_EN - 第8页
Station Software 7 08.1 SP2 / Version Description Ausgabe 10/2015 E dition 8 4 Features of the 708.1 SP2 Station Software Version All features of t he 701.xx - 708.1 SP1 st ation softwar e versions are al so supported in…
Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition
7
3 Compatible Mode
Some station software versions may be used as lower versions in compatible mode. This means
that the new functions of the current version can be used in the compatible version as far as
possible.
The compatible mode is provided to operate stations with lower line software versions in order to
keep the line software version in case of a station upgrade.
The 708.1 SP2 station software version can be operated as Version 707.3 SP2© in compatible
mode.
The visibility and functionality of the new functions in compatible mode are explained in the
following table.
Compatible Mode Meaning
Complete
Complete function support.
Compatible The function is visible and executable at the station. However, new add-
ons in the station software or in the line products are not supported.
Hidden The function is invisible/inactive, e.g. due to licensing or unsupported
SIPLACE Pro download/upload.
Not supported
The function is not supported, e.g. because of failing hardware.
Table3-1: Visibility and functionality in compatible mode
The respective visibility/functionality in compatible mode is specified for the new features in
chapter 5.
The compatible mode can be activated under Settings – SIPLACE station interface clients on
the GUI.
Please also refer to chapter 7.
Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition
8
4 Features of the 708.1 SP2 Station Software Version
All features of the 701.xx - 708.1 SP1 station software versions are also supported in the 708.1
SP2 station software version that does not contain any new features.
Station Software 708.1 SP2 / Version Description Ausgabe 10/2015 Edition
9
5 Features of the 708.1 Station Software Version
NOTICE
Detailed information about the single functions can be found in the Online help for the
station software.
All features of the 701.xx - 708.0 station software versions are also supported in the 708.1 station
software version. The main features of the 708.1 station software version are listed below.
5.1 Reading Individual Barcode Fiducials with Board Camera
Compatible mode: Not supported
For traceability purposes, many components have a 2D-barcode on top of itself or next to the
component pocket at the tape.
As of this station software version, such individual barcode fiducials can be read by the board
camera during pickup and then assigned to the placement position (Reference Designator) in the
provided traceability data.
The option has to be defined and enabled in SIPLACE Pro.
Prerequisites
– The "Reading Barcode recognition with PCB Camera" license is available and enabled.
– Traceability is enabled.
If the option is enabled but reading the barcode fiducial fails, the component will be picked up and
rejected in the respective reject bin. As soon as the set number of repicks is achieved, the feeder
gets disabled and a detailed error message is displayed on the GUI. The operator is prompted to
perform an additional teaching. However, the operator is free to ignore this prompt and may
continue placing the components anyway.
5.2 C&P20 P Placement Head on SIPLACE SX1/SX2 (V2)
Compatible mode: Not supported
This station software version supports the C&P20 P placement head on the SIPLACE SX1/SX2
(V2) placement machine.
The functionality and configurations that are valid for the C&P20 placement head are supported for
the C&P20 P placement head, as well.
NOTICE
The C&P20 P and C&P20 placement heads should not be combined at one station!